Brecknell SBI 210-LCD handleiding
Handleiding
Je bekijkt pagina 14 van 29
AWT35-100109 Rev AB 14/29
5 Menus
There are four menus that allow you to configure, enable, or execute specific functions or options.
• User and Diagnostics Menu,
page 16
• Calibration Menu, page 17
• Service Configuration Menu, page 20.
5.1 User Menu
In the User Menu there are various submenus available to configure specific sections of the scale
operating modes, including the print and communication settings.
In general weighing mode, press the HOLD and ZERO/ON/OFF keys. Release the keys when the
“USER” message pops up to open the User Menu.
Navigate the menu using the keys, press the TARE key to confirm or the ZERO/ON/OFF
key to cancel the operation / exit the menu.
5.1.1 User Options
USER
SubMenu1
SubMenu2
Option
Default
Description
RESET
NO
NO NO
Returns the USER parameter to the factory
setting
YES
RS232
Port
(com1)
BAUD.RT
600
9600 Sets the baud rate of com1
1200
2400
4800
9600
19200
BYT.FMT
8N1
8N1 Sets the data bits format of com1
7O1
7E1
7O2
7E2
OUT.MOD
NONE
PRTCMD
Sets the output mode of com1:
NONE = no communication;
CONT = continuous output;
PRINT = press PRINT key for output;
CMD = via print format command only;
PRT.CMD = output with PRINT key and
print format command (See FMT
);
STABLE = output when the weight stable
condition is met (See Motion
settings)
Note: when set to PRINT or CMD mode,
the weighing must be in stable condition.
CONT
PRINT
CMD
PRTCMD
STABLE
Bekijk gratis de handleiding van Brecknell SBI 210-LCD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Brecknell |
| Model | SBI 210-LCD |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4092 MB |
