Handleiding
Je bekijkt pagina 33 van 112

32
If you note any damage whatsoever before use, do not install the oven if it is damaged and
contact your retailer.
Remove the packaging and put the accessories aside.
Control panel. Remove the protective film from the surface of the control panel.
Do not remove the light brown Mica coating which is found in the cavity of the oven
and which protects the magnetron.
b
b) Installation
1. This product must not be built in.
Leave at least 30 cm of free space above the oven and 20 cm at the sides (Fig 1).
Do not take the feet off the oven.
Do not obstruct the air vents as you risk early damage to your machine.
Fig 1
c)
Electrical Connection
• It is essential to use a socket with an earthing terminal connected in compliance with the
safety standards in force.
• In your electrical installation provide a user-accessible device which must be able to separate
the machine from the mains, the contact opening of which is at least 3 mm on all poles.
• If the power cable is damaged it must be replaced by the manufacturer, its after-sales
service or any other similarly qualified person to avoid any danger.
Check that:
- the power of the installation is sufficient.
- the mains leads are in good condition.
- the diameter of the wires complies with the installation rules.
- your installation is fitted with 16 ampere heat protection.
If in doubt please consult your electrician.
The electrical connection must be carried out before placing the machine in its final position.
Electrical safety must be ensured by a correct connection. During maintenance operations the
machine must be unplugged from the mains and the fuses must be cut off or removed.
Bekijk gratis de handleiding van Brandt SE3000M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Brandt |
Model | SE3000M |
Categorie | Magnetron |
Taal | Nederlands |
Grootte | 10554 MB |