Brandt BT710HQA handleiding
Handleiding
Je bekijkt pagina 10 van 31
9
Proceed as follows to remove the transit bolts:
1. Use a spanner to loosen the four transit bolts then pull
them out.
2. Push the four transit bolt cover caps provided for this
purpose into the holes.
3. Keep the transit bolts in a safe place for future
reuse.
Adjusting the levelling feet
Warning!
The lock nuts on the four levelling feet must be tightened against
the body of the washing machine.
1. Check that the feet are still firmly attached to the washing
machine. If this is not the case, return them to their original
position and tighten the nuts.
2. Slacken the lock nut and turn the foot until it touches the
floor.
3. Adjust the feet and lock them into position using a spanner.
Check that the washing machine is stable.
Bekijk gratis de handleiding van Brandt BT710HQA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Brandt |
| Model | BT710HQA |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 3060 MB |
