Handleiding
Je bekijkt pagina 26 van 34
INSTALLATIONINSTALLATION
9
INSTALLATIONINSTALLATION INSTALLATIONINSTALLATION
4
40
or above a built-in oven, comply with the dimen-
sions provided on the illustrations to ensure a
sufficient air outlet at the front.
Carefully glue the sealing joint to the entire
surround of the glass hob insert the table into
the cabinet
EN
Important
If your hob is located above your oven, the hob’s thermal safety devices can impede the simultaneous
use of the hob and the oven’s pyrolysis programme, display code “F7” in the control zones. In such
circumstances we recommend that you increase the hob’s ventilation by creating an opening in the side
of the cabinet (8 x 5 cm).
These hobs must be connected
to the power grid via an all-pole
cut-off device that complies with
installation regulations in effect.
A disconnection device must be
incorporated into the fixed wiring.
Identify the type of cable of your hob according to
the number of wires and colours.
When switching your hob on or after a lengthy
power cut, a code is shown on the control pad
(this display is reserved for your after-sales ser-
vice, where applicable. The user of the hob does
Electric connections
not need to take notice of it).
This information disappears after around
30 seconds.
Bekijk gratis de handleiding van Brandt BPI 164 HUX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Brandt |
| Model | BPI 164 HUX |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4318 MB |
