Handleiding
Je bekijkt pagina 43 van 66
Troubleshooting
Warning! If there is any anomaly, unplug your appliance. Only a qualified electrician or
competent person may carry out troubleshooting.
If there is any anomaly during operation, check the following points before calling our approved after
sales service or a qualified professional.
Problem
Possible
Causes
Solution
Not
operate
•
The power supply is not turned on and
the plug is not
firmly inserted.
•
Low voltage, power failure or part of
the circuit
tripped.
•
Insert the power cord plug firmly.
•
Check the power supply at home.
Light not on
•
The appliance is not powered on.
•
The light is broken.
•
Unplug and re-plug the power cord.
•
Replace the light with a new one.
Fruits or
vegetables
are
frozen
•
Has the food been placed at the back
of the fridge? The
area near the back wall is where the temperatures are
coldest.
•
Fruits or vegetables are stored in the
Fresh/Chill zone.
•
Not placing food which may freeze
easily at the back of the fridge
compartment.
•
The Fresh/Chill zone is only for meat/
fish.
Fridge/freezer is
over- cooling
•
Temperature control is not set correctly.
•
Set the temperature higher.
Compressor
working for a
long time
•
High ambient temperature causing
long working time.
•
Putting too much food in at one time.
•
Food is put in before it has cooled down.
•
Opening the door too often.
•
The frost layer inside is too thick.
•
This is normal.
•
Do not put too much food in at one
time.
•
Wait until the food has cooled down
before putting it in.
•
Do not open the door too often.
•
Need to defrost.
Door does not
close
properly
•
Door is stuck with objects.
•
Too much food in.
•
Door gasket deformed.
•
Do not put in too much food.
•
Place the appliance stably.
•
Heat the door gasket, then cool it for
restoration (with an electrical drier or
hot water for heating).
Outer wall is hot
•
When the appliance is operating, heat is dissipated to
the outside through the metal tubes inside the cabinet.
•
Higher ambient temperatures in the
summer cause the
temperature of the
outer wall to rise.
•
Higher temperature on the outer wall
is normal.
•
Increase the heat dissipation space, or
put the appliance in a ventilated and
cool place.
Cross or
vertical
beams are
hot
•
There are metal tubes inside the
beams, and the heat
released from the
tubes prevents condensation.
•
This is normal.
Odors
•
Spoiled
food
•
Food with strong odors
•
The interior compartment is dirty.
•
Clean and remove any spoiled food.
•
Make sure strong smelling food is
wrapped airtight.
•
Clean the interior compartment.
Condensation
forms
on the
outside
•
Condensation may form when the
humidity in the
room is high.
•
This is normal. Wipe off the
condensation using a dry cloth.
Condensation
forms inside
the fridge and
drawers
•
The fridge maintains a high humidity
to keep
vegetables and other food items fresh.
•
Humidity is too high in the room and
doors have been
opened frequently.
•
The door gasket are not tight.
•
Wipe off the condensation using a
dry cloth.
•
Do not open doors as frequently or do
not keep them open too long.
•
Check the door gasket, clean or
correct position.
Some noises may be heard during normal appliance operation (compressor operating
cycle, automatic defrosting, circulation of the refrigerating gas through the appliance,
etc.).
If you cannot find the cause of the anomaly, only call our approved after sales service or
a qualified professional.
Bekijk gratis de handleiding van Brandt BIL7755EN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Brandt |
| Model | BIL7755EN |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 8244 MB |
