Handleiding
Je bekijkt pagina 44 van 117
• Leave the freezer door open (NB: leave the refrigerator door closed) and place a basin under the
appliance to recover the water from defrosting. You can also speed up this process by placing a
bowl of hot water inside the compartment.
• Once defrosting is complete, dry the inside properly.
• Plug the power cord back in to return the appliance to service.
• Wait until the freezer has reached the recommended temperature before putting the food back
in it.
Refreezing a thawed product encourages the spread of bacteria. This may become a health
hazard if the bacteria that spreads are pathogens, as these may cause more or less serious
food poisoning depending on the type of bacteria involved. If in doubt, cook the food
involved.
Troubleshooting
Warning! If there is any anomaly, unplug your appliance. Only a qualified electrician
or competent person may carry out troubleshooting.
If there is any anomaly during operation, check the following points before calling our approved after
sales service or a qualified professional.
Problem
Possible cause
Solution
Appliance does
not work.
The power cord is not plugged in
or is loose.
Connect the power cord.
Fuse has blown or is defective.
Check fuse, replace if necessary.
Outlet is defective.
Electrical malfunctions need to be repaired
by an electrician.
Appliance
freezes or
cools too
much.
Temperature is set too cold
Turn the thermostat to a warmer setting
temporarily.
Food is not
frozen enough.
Temperature is not properly set.
Please refer to the section on
setting the temperature.
Door was open for an extended
period.
Only open the door when necessary.
A large quantity of warm food was
placed in the appliance within the
last 24 hours.
Turn the thermostat to a colder setting
temporarily.
The appliance is near a heat
source.
Please refer to the installation location
section
Heavy build-up
of frost on the
door seal.
The door seal is not sealing.
Carefully warm the leaking sections of the
door seal with a hair dryer (on a cool
setting). At the same time, handle the
heated door seal with your hands to ensure
that the appliance seals.
Water on the
floor.
Water drain hole is blocked.
Please refer to the "Care and cleaning"
section.
Appliance
surfaces are
hot when in
use.
This is normal. Heat exchanger
parts are located in the sidewalls.
Wear gloves when touching the sidewalls if
necessary.
Unusual noises
The appliance is not level.
Readjust the feet.
The appliance is touching the wall
or other objects.
Move the appliance slightly.
A component, e.g. a pipe, on the
rear of the appliance is touching
If necessary, carefully bend the component
out of the way.
Bekijk gratis de handleiding van Brandt BFU862YNA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Brandt |
| Model | BFU862YNA |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 17045 MB |
