Handleiding
Je bekijkt pagina 44 van 66
Troubleshooting
Warning! If there is any anomaly, unplug your appliance. Only a qualified electrician or
competent person may carry out troubleshooting.
If there is any anomaly during operation, check the following points before calling our approved after
sales service or a qualified professional.
Problem
Possible cause
Solution
Appliance does not
work
Mains plug is not plugged in or is loose
Insert mains plug.
Fuse has blown or is defective
Check fuse, replace if necessary.
Socket is defective
Mains malfunctions are to be
corrected by an electrician.
Appliance freezes or
cools too much
Temperature is set too cold or the
appliance runs at fast Cool mode.
Turn the temperature regulator to a
warmer setting temporarily.
The food is not frozen
enough.
Temperature is not properly adjusted.
Please look in the initial Temperature
Setting section.
Door was open for an extended period.
Open the door only as long as
necessary.
A large quantity of warm food was
placed in the appliance within the last 24
hours.
Turn the temperature regulation to a
colder setting temporarily.
The appliance is near a heat source.
Please look in the installation location
section.
Heavy build-up of
frost on the door seal.
Door seal is not air tight.
Carefully warm the leaking sections
of the door seal with a hair dryer (on
a cool setting). At the same time
shape the warmed door seal by hand
such that it sits correctly.
Unusual noises
Appliance is not level.
Re-adjust the feel.
The appliance is touching the wall or
other objects.
Move the appliance slightly.
A component, e.g. a pipe, on the rear of
the appliance is touching another part of
the appliance or the wall.
If necessary, carefully bend the
component out of the way.
Water on the floor
Water drain hole is blocked.
See the Cleaning and Care section.
Side panels are hot.
It’s normal. Heat exchange parts are in
the sides.
Take gloves to touch sides if needed.
Some noises may be heard during normal appliance operation (compressor operating
cycle, automatic defrosting, circulation of the refrigerating gas through the appliance,
etc.).
If you cannot find the cause of the anomaly, only call our approved after sales service
or a qualified professional.
Bekijk gratis de handleiding van Brandt BC8511EW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Brandt |
| Model | BC8511EW |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 9082 MB |
