Bowflex IC Bike SEi handleiding
Handleiding
Je bekijkt pagina 30 van 100
30
4. Using a 16mm socket and wrench, remove the Crank
Nut under the threaded Cap.
5. Thread the 25mm Crank Puller into the Crank Arm.
When the Crank Puller is in the correct position,
only 1-2 threads on the outer portion (CP2) of the
Crank Puller should show.
Note: Be sure the end of the Bolt (CP1) in the Crank
Puller is flush with the inner surface (CP2) as shown,
before use.
6. Using a 15mm wrench, turn the inner portion (CP3)
of the Crank Puller clockwise. The Crank Arm will
slide o as it is tightened. Set it safely aside for
reassembly.
7. Using a #2 Phillips screwdriver, remove the 3
screws (A, B) that attach the Left Structural Shroud.
Remove the bottom screws first. Set the screws
safely aside for reassembly.
Remove the Shroud and set it safely aside.
NOTICE: Do not cut or pinch the cables.
CP1 CP2 CP3
Crank Nut
Left Structural shroud - screw locations (disregard
crank arm, removed in earlier step)
A
B
Bekijk gratis de handleiding van Bowflex IC Bike SEi, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bowflex |
| Model | IC Bike SEi |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 47690 MB |
