Bowflex IC Bike SE handleiding
Handleiding
Je bekijkt pagina 23 van 48
Owner’s Manual 23
Assembly
Installing the Shoe Clips (Cleats) on Cycling Shoes (Cycling Shoes not provided)
Note: The provided shoe Cleats fit both the right and left Pedals.
4 mm
Tools needed (not included): pliers, 4 mm hex wrench
1. With a pair of pliers, pull o the rubber cover to expose the cleat
mounting holes on the bottom of the cycling shoe
Note: This step may not be necessary, depending on the type
of shoe.
2. From the bottom of the shoe, put the anti-skid sheet in position
over the cleat holes and then a cleat. Be sure the single arrow on the
cleat points toward the toe of the shoe. Tighten the cleat mounting
bolts (2.5 N·m).
3. The cleat has an adjustment range of 20mm front to back and
5mm left to right. Practice engaging with the Pedal and releasing,
one shoe at a time. Readjust to determine the best cleat position.
4.
Using a 4mm hex key, fully tighten the cleat mounting bolts (5 – 6 N·m).
Bekijk gratis de handleiding van Bowflex IC Bike SE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bowflex |
| Model | IC Bike SE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6301 MB |