Botex LED Stripe All-in-One Control handleiding

Niet gecategoriseerd

Botex

40 pagina's

PDF beschikbaar

Handleiding

10 Troubleshooting

In the following we list a few common problems that may occur during operation. We give you

some suggestions for easy troubleshooting:

Symptom Remedy

The device is not working, no

light, the fan is not running

Check the mains connection and main fuse.

No response to the DMX con‐

troller

1. The DMX indicator should light up. If not, check the

DMX connectors and cables to see if they are properly

linked.

2. If the DMX indicator lights up and there is no

response, check the address settings and DMX polarity.

3. Try using another DMX controller.

4. Check whether the DMX cables run near or parallel to

high-voltage cables that may cause damage or interfer‐

ence to a DMX interface circuit.

Unintended light eects Make sure that the DMX channel assignments of the

devices do not overlap, and that the DMX start address

of devices with independent control is always higher by

the number of channels that have been set for the DMX

mode on another device.

Troubleshooting

LED Stripe All-in-One Control

DMX Controller

Bekijk gratis de handleiding van Botex LED Stripe All-in-One Control, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.