Botex LED Stripe All-in-One Control handleiding
Handleiding
Je bekijkt pagina 21 van 40
Make sure that this number matches the conguration of your DMX controller. The following
table shows the highest possible DMX address for the various DMX modes.
Mode Highest possible DMX address
4 channels 512
9 channels 512
The unit can be controlled in 4 or 9-channel mode. To specify the desired mode, proceed as
follows:
1. Open the main menu.
2.
Navigate to ‘DMX Settings è DMX Channel Mode’.
3. Use [Up] and [Down] to select ‘4CH’ or ‘9CH’ .
4. Conrm your selection with [Enter].
ð
The desired mode is saved.
5. To exit the menu, press [Menu], or wait 30 seconds.
The device can be used in stand-alone operation.
Specifying the DMX mode
Setting the dimmer in stand-
alone operation
Operation
LED Stripe All-in-One Control
21
DMX Controller
Bekijk gratis de handleiding van Botex LED Stripe All-in-One Control, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Botex |
| Model | LED Stripe All-in-One Control |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2162 MB |
