Botex Chainhoist Controller CHC-8-B handleiding

Niet gecategoriseerd

Botex

36 pagina's

PDF beschikbaar

Handleiding

NOTICE!

Damage to the device and connected electric chain hoists due to impulse

operation!

Repeated, momentary presses of the [RUN] button can damage the device and

the connected electric chain hoists.

Always press [RUN] for at several seconds, never several times in a row.

1. Make sure the following:

n Nobody stays in the work area of the electric chain hoists.

n The workspace is free of obstacles.

n You have a clear view of the entire work area and can completely monitor the move‐

ment process.

The device must not be used if not all conditions are fullled.

2. Turn all rotary switches to the [OFF] position.

If the [E-STOP] emergency stop button is pressed and locked: Make sure that the reason

for pressing the emergency stop switch is no longer present and turn it clockwise to the

operating position.

3. Connect the electric chain hoists to the unit, either via the CEE sockets or via the multi-

pin industrial connectors.

4. Make sure the supply voltage is correct and the three phases are connected in the cor‐

rect order.

5. Connect the device to the power supply.

Starting up the device

Starting up

CHC-8-B, CHC-4-B Chainhoist Controller

Motor Controller

Bekijk gratis de handleiding van Botex Chainhoist Controller CHC-8-B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.