Botex Chainhoist Controller CHC-4-B handleiding

Niet gecategoriseerd

Botex

36 pagina's

PDF beschikbaar

Handleiding

10 Troubleshooting

In the following we list a few common problems that may occur during operation. We give you

some suggestions for easy troubleshooting:

Symptom Remedy

The electric chain hoists do not respond when

the [RUN] button is pressed.

1. Check the wiring to the electric chain hoists.

2. Check whether the assigned rotary switch is in the [UP] or [DOWN] position.

3. Check whether the circuit breaker is in the ‘ON’ position.

4. If the emergency stop button is pressed and locked: Make sure that the

reason for pressing the emergency stop switch is no longer present and turn it

clockwise to the operating position.

The device does not respond at all. 1. Check the mains connection and main fuse.

2. Check whether the indicator lights [L1], [L2], [L3] for the three phases of the

power supply light up. If this is not the case, the wiring must be corrected.

3. If the emergency stop button is pressed and locked: Make sure that the

reason for pressing the emergency stop switch is no longer present and turn it

clockwise to the operating position.

4. Make sure that the device is being operated in approved ambient conditions.

Troubleshooting

CHC-8-B, CHC-4-B Chainhoist Controller

Motor Controller

Bekijk gratis de handleiding van Botex Chainhoist Controller CHC-4-B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.