Botex Chainhoist Controller CHC-4-B handleiding

Niet gecategoriseerd

Botex

36 pagina's

PDF beschikbaar

Handleiding

1 Power cable with CEE plug.

2 [MOTOR 1–4]/[MOTOR 5–8] | 16-pin multi-pin industrial connectors for connecting electric chain hoists 1…4 or 5…8.

3 [CONTROL CIRCUIT] | Circuit breaker for rotary switch and emergency stop switch.

4 [MAINS] | Circuit breaker for each phase of the power supply.

5 [L1], [L2], [L3] | Indicator lights for the three phases of the power supply. The device must not be used if not all three

indicator lights light up.

6 [MOTOR 1], [MOTOR 2], [MOTOR 3], [MOTOR 4] | CEE chassis sockets for connecting electric chain hoists 1…4.

7 [MOTOR 1]…[MOTOR 8] | Rotary switches for preselecting the direction of movement for the connected electric chain

hoists 1…8.

8 [E-STOP] | Emergency stop switch

9 Indicator light. Indicates that the selected electric chain hoists are running.

10 [RUN] | Switch for controlling the electric chain hoists whose direction of movement has been set with the [MOTOR 1]

…[MOTOR 8] switches. The selected electric chain hoists run as long as the momentary switch is pressed.

Connections and controls

CHC-8-B, CHC-4-B Chainhoist Controller

Motor Controller

Bekijk gratis de handleiding van Botex Chainhoist Controller CHC-4-B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.