Botex Chainhoist Controller CHC-4-B handleiding

Niet gecategoriseerd

Botex

36 pagina's

PDF beschikbaar

Handleiding

4.2 Electrical installation

DANGER!

Risk of death from electrical current!

Hazardous voltage may be present at cable ends and screw terminals.

The connection of screw terminals and all maintenance and repair work on the

electrical installation of the device may only be performed by a qualied electri‐

cian. Always perform maintenance and repair work when the device is free from

voltage. Failure to comply may result in electric shock and risk of re and loss of

life.

Always observe all electrical safety instructions applicable in the country of opera‐

tion.

The power consumption of the electric chain hoists to be connected must be below the max‐

imum load capacity of the device's outputs.

Create all connections while the device is o. Use only high-quality power supply cables with a

grounded CEE plug. Only one electric chain hoist may be connected to each output. Lay the

cables so that they do not run over sharp edges, are not squashed and are not subjected to

tension.

Installation

CHC-8-B, CHC-4-B Chainhoist Controller

Motor Controller

Bekijk gratis de handleiding van Botex Chainhoist Controller CHC-4-B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.