Boss RC-505MK2 handleiding
Handleiding
Je bekijkt pagina 12 van 26
12
Saving a Memory
Saving a Memory (WRITE)
If you select a dierent memory or turn o the power after
recording or editing the settings, the recorded content or edited
settings are lost. If you want to keep the data, you must save it.
1. Press the [EXIT] button and [ENTER] button
simultaneously.
The WRITE screen appears.
2. Press the [1] or [2] (WRITE) knob.
3. Turn the [1]–[4] knobs to select the memory to which
you want to save.
5 This procedure is not required if the memory number is
acceptable as is.
5 If you decide to cancel, press the [EXIT] button.
4. Press the [ENTER] button.
The memory is saved.
* Make sure not turn to o the power while the “EXECUTING...”
message is shown.
MEMO
You can assign a name to the memory. For details, refer to
“Parameter Guide” (PDF).
Erasing Data from a Memory (CLEAR)
You can erase the data that is saved in a memory, clearing that
memory to an empty state.
1. Press the [EXIT] button and [ENTER] button
simultaneously.
The WRITE screen appears.
2. Press the [3] or [4] (CLEAR) knob.
3. Turn the [1]–[4] knobs to select the memory you want
to clear.
5 This procedure is not required if the memory number is
acceptable as is.
5 If you decide to cancel, press the [EXIT] button.
4. Press the [ENTER] button.
The memory will be cleared.
* Make sure not turn to o the power while the “EXECUTING...”
message is shown.
Bekijk gratis de handleiding van Boss RC-505MK2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Boss |
| Model | RC-505MK2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4872 MB |
