Boss GM-800 handleiding
Handleiding
Je bekijkt pagina 8 van 22
8
Getting ready
For six-string bass guitars
GK PU Pos
6STR
High C-string
Low B-string
1st string
3rd string
2nd string
4th string
Setting the pickup sensitivity
The volume for the strings may dier, depending on the distance
between each string and the divided pickup. You can correct these
volume dierences by setting the pickup sensitivity.
9. Press the PAGE [
Í
] [
Ë
] buttons to show the SENS
screen.
10.
Turn the [SELECT] knob to move the cursor to the
string to set.
11.
Turn the [4] knob to adjust the SENS value.
Pluck each string at the hardest strength you would likely use,
and adjust the sensitivity values so that the meters don’t reach
excessive levels, which indicates an overload. If a given meter
overloads, lower the SENS value for that string.
* The level meters may overload when using certain guitars or bass
guitars, even when the sensitivity is set to minimum.
If this happens, widen the distance a bit more than normal
between the divided pickup and the strings.
12.
Check the volume balance for all the strings.
Adjust the volume balance to minimize the dierence in volume
between strings, by playing all of the strings at the usual strength
and lowering the SENS value for any string that is particularly
loud.
13.
Press the [EXIT] button a number of times to return
to the play screen.
You need to make these settings in situations such as when you’ve
newly installed a divided pickup on your guitar or bass guitar, or
when you’ve changed the height of the divided pickup.
For details, refer to “GM-800 Parameter Guide” (PDF).
Adjusting the volume
Use the [OUTPUT LEVEL] knob to adjust the overall volume of this
unit.
Using the tuner
1. Press the [MENU] button.
2. Press the PAGE [
Í
] [
Ë
] buttons to display “TUNER”.
3. Press the [2] knob.
The tuner screen appears.
4. Press the [EXIT] button a number of times to return
to the play screen.
Tuner settings
To make tuner settings, use the [1] and [2] knobs located below the
display.
Parameter Value Explanation
[1] MASTER TUNE 435–445 Hz Species the reference pitch.
[2] OUTPUT
MUTE
Sound will not be output while
tuning.
BYPASS
While tuning, the sound of
the guitar being input to the
GM-800 will be output without
change.
THRU
Lets you tune your guitar while
outputting the sound of the
current scene.
Bekijk gratis de handleiding van Boss GM-800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Boss |
| Model | GM-800 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3828 MB |
