Boss GM-800 handleiding
Handleiding
Je bekijkt pagina 6 van 22
6
Getting your guitar/bass ready
¹ To use the GM-800, you must connect a guitar or bass guitar that
uses a divided pickup (GK pickup) capable of outputting separate
signals from each string, such as the BOSS GK-5 or GK-5B.
¹ See the GK pickup owner’s manual for how to install the GK
pickup.
¹ Issues such as neck warpage, worn frets that cause string buzzing,
and mistuned octaves may cause wrong notes to play.
Connecting the equipment
Ø Refer to “Rear panel (connecting your equipment)” (p. 4).
Attaching the rubber feet
You can attach the rubber feet (included)
if necessary.
Attach them in the locations shown in the
illustration.
* Using the unit without rubber feet may damage the oor.
* When turning the unit over, be careful so as to protect the
buttons and knobs from damage. Also, handle the unit
carefully; do not drop it.
Turning the power on
* Before turning the unit on/o, always be sure to turn the volume
down. Even with the volume turned down, you might hear some
sound when switching the unit on/o. However, this is normal
and does not indicate a malfunction.
* To turn the power o, reverse the order.
1. Turn the volume all the way down on your guitar
amp and other devices connected to this unit.
2. Connect your equipment to the OUTPUT jack(s).
3. Connect your guitar or other instrument.
4. Plug the included AC adaptor into the DC IN jack of
this unit.
This turns the power on.
5. Turn on your guitar amp and other devices
connected to this unit.
Setting the Auto O function
The power to this unit will be turned o automatically after a
predetermined amount of time has passed since it was last used
for playing music, or its buttons or controls were operated (Auto
O function). If you do not want the power to be turned o
automatically, disengage the Auto O function.
* Unsaved data is lost when the power turns o. You must save
settings that you want to keep.
* To restore power, turn the power on again.
Ø For details on the settings, refer to ““Turning o the auto o
function” (p. 15)”.
Selecting devices to connect to the
output jacks (OUTPUT SELECT)
1. Press the [MENU] button.
2. Press the PAGE [
Í
] [
Ë
] buttons to display “IN/OUT
SETTING”.
3. Press the [4] knob.
The IN/OUT SETTINGS screen appears.
4. Turn the [SELECT] knob to move the cursor to
“OUTPUT SELECT”.
5. Turn knob [1] to select the device that’s connected.
OUTPUT SELECT Explanation
LINE/PHONES
Choose this setting if you’re using headphones,
or if the
GM-800 is connected to a keyboard amp, mixer,
or digital recorder.
GUITAR AMP
Use this setting when connecting to the guitar
input of a guitar amp.
* To use this unit with a bass guitar amp, use the LINE/PHONES
setting.
Getting ready
Bekijk gratis de handleiding van Boss GM-800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Boss |
| Model | GM-800 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3828 MB |
