Boss GM-800 handleiding
Handleiding
Je bekijkt pagina 20 van 22
20
Connecting with an external MIDI device
With the GM-800, you can connect to an external MIDI device to perform the following operations.
Operations from the GM-800
Operation Explanation
Outputting program change messages
When you select a scene on the GM-800, either the program change message that’s set in SCENE MIDI or the
program change message that corresponds to the scene number you selected is transmitted at the same time.
This lets you switch the external MIDI device that receives this program change message to the corresponding
settings.
For details, refer to “GM-800 Parameter Guide” (PDF).
Outputting control change messages
Control change messages can be output when you operate the following controls: [CTL 1] switch, [CTL 2] switch,
footswitches/expression pedals connected to the CTL 3, 4/EXP 1 or CTL 5, 6/EXP 2 jacks, [S1] or [S2] button on
the divided pickup, GK volume.
You can use these messages to control the parameters or other data of an external MIDI device.
For details, refer to “GM-800 Parameter Guide” (PDF).
Outputting performance data
(GUITAR TO MIDI)
Guitar (or bass guitar) performance data is transmitted as note or pitch bend data.
You can use this data to play a synthesizer sound module or other connected device.
To use GUITAR TO MIDI, set the system parameter that works system-wide for the GM-800 (GUITAR TO MIDI On/
O ) to “ON”, and congure the parameters that are used for each scene, such as pitch bend data.
For details, refer to “GM-800 Parameter Guide” (PDF).
Operations from an external MIDI device
What you can do Explanation
Switch between scene numbers
The unit receives program change messages from external MIDI devices.
This lets you use an external MIDI device to switch between scenes on the GM-800.
For details, refer to “GM-800 Parameter Guide” (PDF).
Receive control change messages
The unit receives control change messages from an external MIDI device.
You can also congure the parameters of the GM-800 to be controlled from an external MIDI device.
For details, refer to “GM-800 Parameter Guide” (PDF).
Inputting performance data
This unit receives data such as note and pitch bend data from an external MIDI device.
This lets you use the GM-800 as an external sound module.
In MIDI SETTINGS, set the Note Source parameter to “MIDI”.
For details, refer to “GM-800 Parameter Guide” (PDF).
Bekijk gratis de handleiding van Boss GM-800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Boss |
| Model | GM-800 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3828 MB |
