Boss GM-800 handleiding
Handleiding
Je bekijkt pagina 16 van 22
16
Connecting external devices
Connecting a computer (USB COMPUTER
port)
Connecting the GM-800 to a computer via USB lets you do the
following.
¹ Transmit and receive digital audio signals between the computer
and this unit
¹ Use the dedicated software to edit and manage scenes from your
computer
¹ Download scenes from the dedicated website
Installing the dedicated driver
To use the GM-800, you must download the driver from the website
shown below and install it on your computer.
For details on installation, refer to the BOSS support website.
Ø https://www.boss.info/support/
Using this unit as an audio interface
You can record the sound of the GM-800 on your computer, or output
the sound from your computer via the OUTPUT jacks of the GM-800.
* For details of the audio signal ow when connected via USB and
on how to make settings, refer to “GM-800 Parameter Guide”
(PDF).
* Refer to the instruction manual for the software you are using to
learn how to switch the input source of the software.
Using the GM-800’s dedicated software
Please download the dedicated software from the BOSS website
shown below. For details on how to use the software, refer to the
Readme.htm le that comes with the download.
Ø https://www.boss.info/support/
Using the dedicated software lets you do the following:
¹ Easily download scenes from the dedicated website into this unit.
¹ Edit the scene settings.
¹ Add names to scenes.
¹ Organize scenes in order and switch them around.
¹ Back up scenes and system settings, and restore these settings.
Connecting a USB ash drive (USB
MEMORY port)
Connect a USB ash drive to the USB MEMORY port.
* Use a commercially available USB ash drive. Note that not all
commercially available USB ash drives are guaranteed to work.
Formatting a USB ash drive (FORMAT USB
MEMORY)
Be sure to format your USB ash drive on this unit if you are using it
for the rst time.
NOTE
If the USB ash drive contains important data, be aware that this
operation erases all data from the drive.
1. Choose [MENU]
Ó
“USB MEMORY”.
2. Press the [PAGE
Í
] [PAGE
Ë
] buttons to show
“FORMAT”.
3. Press the [1] knob.
A conrmation message appears.
To execute the format operation, press the [4] knob.
If you decide to cancel, press knob [3].
When formatting is complete, the message “Completed” appears.
* Never turn o the power or disconnect the USB ash drive during
a process, such as while the “Executing…” display is shown.
Bekijk gratis de handleiding van Boss GM-800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Boss |
| Model | GM-800 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3828 MB |
