Boss GM-800 handleiding
Handleiding
Je bekijkt pagina 12 van 22
12
Editing the scenes
Conguring the scene parameters (SCENE
EDIT)
Here’s how to set the scene parameters aside from those for parts.
For details on the parameters, refer to the “GM-800 Parameter Guide”
(PDF).
1. Press the [MENU] button.
The MENU screen appears.
2. Press the [1] knob.
The scene edit screen appears.
3. Turn the [SELECT] knob to move the cursor to the
parameter you want to set.
4. Use knobs [1]–[4] to adjust the parameters at the
bottom of the screen.
Use the PAGE [
Í
] [
Ë
] buttons to switch between the parameters
that you want to edit. The current page is indicated in the lower
center of the screen.
* To change a value in larger steps, turn a knob while pressing it.
* The number of parameters and pages diers with each setting.
Conguring the control assignments
(CONTROL ASSIGN)
A variety of functions can be assigned to the [
É
], [
Ç
], [CTL1] and
[CTL2] switches on the top panel, as well as to the expression pedals
or footswitches that are connected to the CTL 3, 4/EXP 1 and CTL 5,
6/EXP 2 jacks on the rear panel.
For details, refer to “GM-800 Parameter Guide” (PDF).
* The [
É
], [
Ç
], [CTL1], or [CTL2] switch LEDs on the top panel
may either light up or blink, depending on the function you’ve
assigned.
Setting the functions (CONTROL FUNCTION)
1. Press the [MENU] button.
The MENU screen appears.
2. Press the [2] knob.
The CONTROL/ASSIGN screen appears.
3. Press the [1] knob.
The CONTROL FUNCTION screen appears.
4. Turn the [SELECT] knob to select the item that you
want to set.
Turning the knob will move the selected item vertically.
5. Turn knobs [1]–[4] to edit the value of the item
selected for each switch.
If necessary, use the [
Í
] [
Ë
] buttons to switch between pages of
settings.
The settings for each part may be shown instead, depending on
the function you’ve selected. Use these to turn each part on/o,
set the degree of change for the eects and so on.
* The footswitch and expression pedal functions must be specied
for each scene. However, if you set PREF (PREFERENCE) to
“SYSTEM”, all scenes use those functions in common.
* The eect may not be audible for some functions (such as PART
OCTAVE UP/DOWN) until you play the next note.
Bekijk gratis de handleiding van Boss GM-800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Boss |
| Model | GM-800 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3828 MB |
