Handleiding
Je bekijkt pagina 8 van 86
8 • English DesignMax DM8SE • Installation Guide
BoseProfessional.com
Installation
Removing the Grille
There are four small openings
on each corner of the
grille (1). Along the side of
the loudspeaker, insert a
small, flat tool into the grille
openings to disengage the
release tabs. Pull the grille
away from the loudspeaker.
q
q
Safety and Regulatory Compliance
The DesignMax DM8SE loudspeaker has passed testing and complies with the following specifications and
uses:
Listed to ANSI/UL 1480A-2016, Speakers for Commercial & Safety Professional Use
General-Purpose Use - UL Category UEAY/UEAY7, File Number S36835
Suitable for use in wet locations - IP55 per IEC 60529, 2019
The DesignMax DM8SE is suitable for use outdoors in wet locations
Suitable for installation using Class 1, Class 2, Class 3 wiring methods in accordance with NFPA 70,
National Electrical Code, 2017, Article 640
The DesignMax DM8SE loudspeaker has been designed to the requirements defined in the following
European regulatory specification for combination systems:
Tested to IEC60268-5, 2007
Adjusting the Logo
You can rotate the Bose logo to align with your
loudspeaker orientation. With one hand, press the
button on the back of the grille. Rotate the logo with
the other hand. The logo can be rotated clockwise or
counterclockwise.
Note: Do not pinch the button inward unless you
intend to remove the logo.
Attaching the Grille
Place the grille over the front of the loudspeaker
and push it firmly until it snaps into place.
q
q
q
q
Bekijk gratis de handleiding van Bose DesignMax DM8SE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bose |
| Model | DesignMax DM8SE |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 19390 MB |
