Handleiding
Je bekijkt pagina 5 van 88
English • 5Installation Guide • DesignMax DM2C-LP
PRO.BOSE.COM
Setup
Wiring the Loudspeaker
Wire Gauge
The DesignMax DM2C-LP loudspeaker is designed to work with 18 AWG (0.8 mm
2
) to 14 AWG (2.1 mm
2
) size wire only.
Connection Diagrams
Expose six millimeters (¼ inch)
of bare wire to attach to the
terminals.
70V/100V 16Ω
Loudspeaker Settings
70V
1.2W 2.3W 4.5W 9W*
16Ω
2.3W 4.5W 9W NC**
100V
** NC: No Connection (do not use)* Factory default
Transformer Tap Setting
Set tap by turning. Use a flat head screwdriver.
1
.
2
W
2
.
3
W
2
.
3
W
4
.
5
W
4
.
5
W
9
W
9
W
N
C
1
6
Ω
Preparing the Installation
Using a Safety Cable
Some regional construction codes require the use of a secondary method of securing loudspeakers to support structures
to provide additional safety. Choose a mounting position, method, and hardware consistent with local building codes and
regulations.
Bose recommends using (1) a safety wire or (2) a safety cable as a secondary securing mechanism. See the diagrams
below for safety attachment points.
Follow the manufacturer’s instructions for any secondary securing mechanism implemented.
qw
q
Bekijk gratis de handleiding van Bose DesignMax DM2C-LP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bose |
| Model | DesignMax DM2C-LP |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 16995 MB |
