Handleiding
Je bekijkt pagina 31 van 40
Troubleshooting en
Fault Cause and troubleshooting
All other error codes. Malfunction
1.
Restart the appliance.
2.
If the fault occurs again, disconnect the appliance
from the power supply for at least 30 seconds.
Unplug the appliance from the mains or switch off
the circuit breaker in the fuse box.
3.
If the fault persists, call customer service.
Page34
Please specify the exact error message when call-
ing. If possible, document the fault with photos and
videos.
"Hot" and the drum
rotates.
Not a fault. The cooling process is active.
No action required.
Note: Do not change the programme during the cool-
ing process. The cooling process takes up to 10
minutes.
and programme
terminated.
The condensation container is full.
Empty the condensation container.
Page24
The water outlet hose is not connected correctly, or is
kinked or trapped.
Check the installation of the water outlet hose.
Page11
Water outlet hose is blocked.
Rinse the water outlet hose with tap water.
The filter for the condensation tank is soiled.
Clean the filter for the condensation container.
Page29
"CrE" The basic appliance care programme should be run.
Run the basic appliance care programme
Page27
.
Fluff filter is soiled.
Clean the fluff filter.
Page23
Not a fault. The automatic self-cleaning function rinses
the appliance's heat exchanger.
No action required.
Note: Do not pull out the condensation container and
do not interrupt the programme.
The programme does
not start.
Childproof lock is activated.
Deactivate the childproof lock.
Page26
Finish in is activated.
Check whether Finish in is activated.
Page17
31
Bekijk gratis de handleiding van Bosch WQG24502GB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bosch |
| Model | WQG24502GB |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 3002 MB |
