Handleiding
Je bekijkt pagina 30 van 40
en Cleaning and servicing
hot mains water into the condensa-
tion container.
Hold the filled condensation con-
tainer level so that no liquid spills
out.
2.
Insert the condensation container
so that it locks into place.
3.
Set the programme selector to po-
sition 1.
Page28
4.
Press and hold the Iron Dry but-
ton and turn the programme se-
lector to position 4
Page28
.
5.
Release Iron Dry .
"CP1" and the programme dura-
tion alternate on the display.
6.
Press .
"CP2" and the programme dura-
tion alternate on the display.
7.
Press Start/Reload .
The appliance care programme
starts and a signal tone sounds.
After around 3hours, the appli-
ance pauses the appliance care
programme and the remaining
programme duration flashes on
the display.
8.
Empty the condensation container.
Page26
9.
Pour approx. 1.5litres of hot mains
water into the condensation con-
tainer.
10.
Carefully swivel the condensation
container horizontally and empty it
to rinse out any remaining appli-
ance care product.
Continuing the intensive appli-
ance care programme
1.
Pour approx. 1.5litres of hot mains
water into the condensation con-
tainer.
Hold the filled condensation con-
tainer level so that no liquid spills
out.
2.
Insert the condensation container
so that it locks into place.
3.
Press Start/Reload .
The appliance care programme
continues.
"End" appears on the display and
a signal tone sounds once the ap-
pliance care programme has
ended.
4.
Empty the condensation container.
Page26
5.
If you drain the condensation using
the water outlet hose, remove the
stopper from the underside of the
condensation container and insert
it into the recess in the top of the
condensation container.
Page29
6.
Switch off the appliance.
Page24
Cleaning and servicing16 Cleaning and servi-
cing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
16.1 Moisture sensor
The moisture sensor in this appliance
measures how damp the laundry is
during the drying cycle. The appli-
ance changes the duration of the
automatic programme depending on
the residual moisture in the laundry.
Cleaning the moisture sensor
Over time, residue from limescale,
detergents and care products can
build up on the moisture sensor.
Clean the moisture sensor regularly.
ATTENTION
Hard or rough objects may damage
the moisture sensor.
Do not use hard or rough objects,
abrasive cleaning products or steel
wool for cleaning.
30
Bekijk gratis de handleiding van Bosch WQG24500GB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bosch |
| Model | WQG24500GB |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 3058 MB |
