Handleiding
Je bekijkt pagina 41 van 48
Troubleshooting en
41
Fault Cause and troubleshooting
The programme does
not start.
You have not pressed Start/ Reload.
▶
Press Start/ Reload.
No programme set.
1.
→"Setting a programme", Page30.
2.
→"Starting the programme", Page31.
The length of the pro-
gramme changes dur-
ing the drying cycle.
The programme operation is optimised electronically.
This may change the programme duration.
▶
Not a fault – no action required.
Pumping noise. Condensation pump active.
▶
Not a fault – normal operating noise.
Buzzing noise. Compressor ventilation active.
▶
Not a fault – normal operating noise.
The drying time is too
long.
The base unit's filter is soiled.
▶
→"Cleaning the filter system on the base unit",
Page33
Fluff filter is soiled.
▶
→"Cleaning the fluff filter", Page31
The ambient temperature is greater than 30 °C.
▶
Ensure that the ambient temperature is lower than
30 °C.
The ambient temperature is lower than 15 °C.
▶
Ensure that the ambient temperature is above 15
°C.
Insufficient air circulation at the appliance's installation
location.
▶
Ventilate the appliance's installation location.
Appliance air inlet is blocked.
▶
Ensure that the air inlet on the appliance is kept
clear.
Heat exchanger is soiled.
1.
→"Opening the base unit", Page36.
2. Clean the heat exchanger.
→"Cleaning the base unit", Page37
3.
→"Closing the base unit", Page37.
Water is leaking from
the appliance.
Appliance is not correctly aligned.
▶
Aligning the appliance
The seal for the heat exchanger cover is dirty.
Bekijk gratis de handleiding van Bosch WQG24200ID, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bosch |
| Model | WQG24200ID |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 3680 MB |
