Handleiding
Je bekijkt pagina 50 van 68
en Troubleshooting
50
Fault Cause and troubleshooting
Creasing. ▶ Set the suitable programme for the type of fabric.
Easy-Care fabrics are dried for too long.
The appliance is not
working.
The mains plug of the power cord is not plugged in.
▶ Connect the appliance to the power supply.
The circuit breaker in the fuse box has tripped.
▶ Check the circuit breaker in the fuse box.
There has been a power cut.
▶ Check whether the lighting in your room or other
appliances are working.
There is a software fault.
▶ To restart the appliance, press and hold for ap-
proximately 5seconds.
The programme does
not start.
has not been pressed.
▶ Press .
Door is not closed.
▶ Close the door.
Childproof lock is activated.
▶ Deactivate childproof lock.
→"Deactivating the childproof lock", Page36
Ready in is activated.
▶ Check whether Ready in is activated.
→"Buttons", Page25
Laundry is caught in the door.
▶ Remove any trapped laundry.
The pump for the intelligent dosing system is blocked.
1. Put the appliance into standby mode.
2. Clean the pump unit.
→"Cleaning the detergent drawer", Page41
3. Switch the appliance on.
4. If the display appears again after cleaning the
pump unit, or the programme cannot be started,
call customer service.
→"Customer Service", Page60
Note:You can deactivate and manually dose the intel-
ligent dosing system until the fault is rectified.
The detergent drawer has not been pushed in fully.
▶ Push in the detergent drawer until the symbol goes
out.
Bekijk gratis de handleiding van Bosch WNC254ARSA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bosch |
| Model | WNC254ARSA |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 5426 MB |
