Handleiding
Je bekijkt pagina 18 van 28
18
en Parts and operating controls
Parts and operating
controls
High-speed motor block
The blender is equipped with a high-speed
motor with a motor speed of up to 43000
revolutions per minute.This not only
provides particularly fast and fine blending
results but also makes it possible to heat
food. Using the (Soup) automatic
programme, for example, a hot soup can be
made from cold ingredients.
Note: At the
(max) speed setting, the
blender runs at the highest speed when
using the
/
(Pulse) button and with
certain automatic programmes. In order to
prevent unwanted heating of food, process
the ingredients for a shorter time or at a
lower speed.
/
(on/off) switch
To switch the appliance on and off.
Status display
To display the appliance status and as
a mark for the zero setting of the rotary
selector.
Display
Display lights up: appliance is switched
on and ready for use
Display flashes:
– fault in the appliance
– Blender jug is not correctly positioned
or has become detached
– Rotary selector not at zero setting
when switched on
– after interruption of the power supply
– longer than 5½ minutes of continuous
operation (manual mode)
Rotary selector
For continuous adjustment of the blender
knife speed.
Settings
Zero setting (mark points to the status
display) = standstill
(min)
Lowest speed
(max)
Highest speed
Caution!
When the appliance automatically turns off
after 51/2 minutes of continuous operation
at the
(max) speed setting, only use
the
(max) speed setting for another
1-2 minutes at the most after turning the
machine back on. Otherwise, the food
may heat up too much and damage the
container.
Notes:
– The status display flashes if the rotary
selector is not at the zero setting when
switched on, if the blender jug has
become detached, or if the electricity
supply has been interrupted. Turn the
rotary selector first to the zero setting
and then continue.
– The rotary selector setting does not
affect the use of the
/
(Pulse)
function.
/
(Pulse) button
For switching to the maximum speed
for a short time. The appliance works at
maximum speed while the
/
(Pulse)
button is pressed.
Note: The function cannot be used while an
automatic programme is running.
Programme selection buttons
with LEDs
For selecting and starting automatic
programmes. X “Automatic programmes”
see page 20
All LEDs light up after switching on. The
selected programme will start after pressing
the button and the appliance will run
automatically.
Bekijk gratis de handleiding van Bosch VitaBoost MMBH6P6BT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bosch |
| Model | VitaBoost MMBH6P6BT |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 2660 MB |
