Handleiding
Je bekijkt pagina 7 van 16

Before using for the first time or using after a long time en
7
Before using for the first time or using after a long time
Before using for the first time
or using after a long time
Before using for the first time or using after a long time
Before using the appliance for the first time
or using it after a long time, clean all parts
that come into contact with food ingredients
thoroughly.
Preparing the appliance and parts
▶ Never place plastic, paper or cloths un-
der the appliance as they may block the
ventilation openings.
1. Place the appliance on a stable, level,
clean and flat work surface.
2. Ensure that the rotary switch is set to Off.
3. Rotate the motor shaft by hand via the
motor coupler on top of the main appli-
ance.
The motor shaft should rotate freely.
Preparing food
Preparing food
Preparing food
1. Cut up large items of food into chunks of
approx. 2 cm.
2. Allow hot ingredients to cool down be-
fore pouring them into the jar.
Place the Jar on the main unit
Place the Jar on the main unit
Place the Jar on the main unit
1. Carefully place the jar on the main unit.
‒ Ensure that the jar's latches sit cor-
rectly in the notches of the base unit.
2. Rotate the jar clockwise until it locks and
use the handle to lock.
Processing food
Processing food
Processing food
Notes
¡ You may observe some minor oil
spillage in the jar and jar sockets during
the first two to three operations. This is
normal. Clean smaller oil leaks thor-
oughly with water and dry the jars with a
soft cloth.
¡ Do not fill or empty the jars with your
hands.
¡ Do not store food in the jars.
¡ Do not allow the appliance to run con-
tinuously for longer than 5 minutes. Wait
2 minutes before continuing to use the
appliance.
¡ The recommended time for grinding dry
ingredients is max. 2 minutes. If you
need finer powder, wait 2 minutes and
grind again.
1. Fill the jar with the prepared food.
2. Check that the lid seal is positioned cor-
rectly.
3. Place the lid on the jar and press down.
4. Hold the lid gently during use.
5. Insert the mains plug.
6. Set the rotary switch to the required posi-
tion and speed.
7. After use, set the rotary switch to Off and
check the contents.
8. Repeat until the desired results are ob-
tained.
9. After switching off the appliance, wait un-
til the blade stops rotating.
10.Pull out the mains plug.
11.Turn the jar anti-clockwise and remove it
from the main unit.
Bekijk gratis de handleiding van Bosch TrueMixx Serie 2 MG2213C3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Bosch |
Model | TrueMixx Serie 2 MG2213C3 |
Categorie | Blender |
Taal | Nederlands |
Grootte | 1278 MB |