Bosch SMS6TCI02G handleiding
Handleiding
Je bekijkt pagina 44 van 56
en Troubleshooting
Fault Cause and troubleshooting
Display "Check water
supply" flashes
A technical fault is present.
1.
Press .
2.
Unplug the appliance or switch off the fuse.
3.
Wait at least 2minutes.
4.
Insert the mains plug of the appliance in a socket or
switch on the fuse.
5.
Switch the appliance on.
6.
If the problem occurs again:
Press .
Turn off the water tap.
Pull out the mains plug.
Contact Customer Service
Page51
and give
the error code.
E:30-00 will light up
alternately.
Water protection system is activated.
1.
Turn off the water tap.
2.
Call Customer Service
Page51
.
E:31-00 will light up
alternately.
Water protection system is activated.
1.
Turn off the water tap.
2.
Call Customer Service
Page51
.
E:32-00 will light up
alternately or indicator
for water supply lights
up.
Supply hose is kinked.
Install the inlet hose without kinks.
Water tap is turned off.
Turn on the water tap.
Water tap is jammed or furred up.
Turn on the water tap.
The flow rate must be at least 10 l/min when the wa-
ter supply is open.
44
Bekijk gratis de handleiding van Bosch SMS6TCI02G, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bosch |
| Model | SMS6TCI02G |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 5063 MB |
