Bosch SMS6HVI01I handleiding
Handleiding
Je bekijkt pagina 43 van 60
Troubleshooting en
43
Fault Cause Troubleshooting
E:90-01 will light up altern-
ately.
Mains voltage is too low. This is not a fault on the appliance.
1. Contact an electrician.
2. Have the mains voltage and elec-
trical installation checked by an
electrician.
E:92-40 will light up altern-
ately.
Filters are soiled or blocked. ▶ Clean the filters.
→"Cleaning filters", Page38
A different error code ap-
pears in the display window.
E:01-00 to E:90-10
A technical fault is present. 1. Press .
2. Unplug the appliance or switch off
the fuse.
3. Wait at least 2minutes.
4. Insert the mains plug of the appli-
ance in a socket or switch on the
fuse.
5. Switch the appliance on.
6. If the problem occurs again:
‒ Press .
‒ Turn off the water tap.
‒ Pull out the mains plug.
‒ Contact "Customer Service"
→Page55 and give the er-
ror code.
Washing results
Fault Cause Troubleshooting
Tableware is not dry. No rinse aid used or dosage
set too low.
1. Add "Rinse aid" →Page26.
2. Set the amount of rinse aid to be
dispensed.
→"Setting the amount of rinse aid",
Page27
Programme or programme
option has no drying phase,
or the drying phase is too
brief.
▶ "Select a programme with drying,
e.g. intensive, strong or ECO pro-
gramme." →Page18
Some option buttons decrease the
drying result, e.g varioSpeed.
Bekijk gratis de handleiding van Bosch SMS6HVI01I, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bosch |
| Model | SMS6HVI01I |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 5615 MB |
