Bosch SMS6HMC00I handleiding
Handleiding
Je bekijkt pagina 24 van 52
en Rinse aid system
The water hardness is 0 - 8°E.
You do not need to use special
salt.
1.
Press .
2.
To open the basic settings, press
for 3 seconds.
The display shows Hxx.
The display shows .
3.
Press repeatedly until the dis-
play shows H00.
4.
To save the settings, press
for 3 seconds.
The water softening system is
switched off and the salt refill in-
dicator is deactivated.
Note: When switching from com-
bined detergents with salt replace-
ment substances to separate deter-
gents, please make sure to set the
water softening system to the right
water hardness again.
"Setting the water softening sys-
tem", Page22
Rinse aid system11 Rinse aid system
11.1 Rinse aid
For optimum drying results, use rinse
aid.
Only use rinse aid for domestic dish-
washers.
Adding rinse aid
If the rinse aid refill indicator lights
up, top up with rinse aid. Only use
rinse aid for domestic dishwashers.
1.
Press the catch on the lid of the
dispenser for rinse aid and lift .
2.
Add rinse aid up to the max mark.
3.
If rinse aid spills out, remove it
from the tub.
Spilled rinse aid can cause ex-
cessive frothing during the wash
cycle.
4.
Close the lid of the dispenser for
rinse aid.
The lid clicks into position.
11.2 Setting the amount of
rinse aid
If there are streaks or water marks on
tableware, change the amount of
rinse aid.
1.
Press .
2.
To open the basic settings, press
for 3 seconds.
The display shows Hxx.
The display shows .
24
Bekijk gratis de handleiding van Bosch SMS6HMC00I, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bosch |
| Model | SMS6HMC00I |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 4566 MB |
