Bosch SMS4HMC65Q handleiding
Handleiding
Je bekijkt pagina 40 van 52
en Troubleshooting
40
Troubleshooting
18 Troubleshooting
Troubleshooting
Tip:You can find further information and explanations on troubleshooting on-
line by scanning the QR code in the table of contents and on our website
www.bosch-home.com.
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
▶ Only use genuine spare parts when repairing the appliance.
▶ If the power cord of this appliance is damaged, it must be replaced with a
special connection cable, which is available from the manufacturer or his
Customer Service.
Fault Cause and troubleshooting
Display "Check water
supply" flashes
A technical fault is present.
1. Press .
2. Unplug the appliance or switch off the fuse.
3. Wait at least 2minutes.
4. Insert the mains plug of the appliance in a socket
or switch on the fuse.
5. Switch the appliance on.
6. If the problem occurs again:
‒ Press .
‒ Turn off the water tap.
‒ Pull out the mains plug.
‒ Contact Customer Service →Page48 and give
the error code.
E:30-00 will light up
alternately.
Water protection system is activated.
1. Turn off the water tap.
2.
Call Customer Service →Page48.
E:31-00 will light up
alternately.
Water protection system is activated.
1. Turn off the water tap.
2.
Call Customer Service →Page48.
E:32-00 will light up
alternately or indicator
for water supply lights
up.
Supply hose is kinked.
▶ Install the inlet hose without kinks.
Water tap is turned off.
▶ Turn on the water tap.
Water tap is jammed or furred up.
▶ Turn on the water tap.
The flow rate must be at least 10 l/min when the
water supply is open.
Bekijk gratis de handleiding van Bosch SMS4HMC65Q, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bosch |
| Model | SMS4HMC65Q |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 4696 MB |
