Handleiding
Je bekijkt pagina 17 van 24
HomeConnect en
2.
Follow the instructions in the HomeConnect app.
12.2 Wi-Fi symbol
The Wi-Fi indicator on the control panel changes ac-
cording to the status and quality of the connection and
the availability of the HomeConnect server.
status Description
Lights up steadily at half
brightness.
No network connection
saved. Ready to add Wi-Fi
network.
Flashes at half brightness. Ready to pair the device.
Start of deactivation.
Lights up steadily at full
brightness.
Network connection saved
and Wi-Fi active.
Flashes at full brightness. Network connection is be-
ing established.
Switched off. Appliance is switched off.
12.3 Adding or removing a Wi-Fi home
network
The following overview shows how to add or remove a
Wi-Fi home network.
Wi-Fi home network
status
Action
No Wi-Fi home network
stored.
To add the Wi-Fi home net-
work, briefly press .
The Wi-Fi home network
has now been saved.
To pair another appliance,
press and hold .
The Wi-Fi home network
has now been saved.
To reset the Wi-Fi home
network settings, press and
hold . Wait for a few
seconds and, when
flashes, press and hold
again.
12.4 Switching off the network connection
Press and hold . If the button flashes and a signal
sounds, press and hold again.
The connection to the Wi-Fi network is switched off
and the network connections are disconnected.
Note: To switch the network connection back on, see .
"Adding or removing a Wi-Fi home network",
Page17
12.5 Software update
Your appliance's software can be updated using the
software update function, e.g. for the purposes of optim-
isation, troubleshooting or security updates.
To do this, you must be a registered HomeCon-
nectuser, have installed the app on your mobile device
and be connected to the HomeConnectserver.
As soon as a software update is available, you will be
informed via the HomeConnectapp and will be able to
start the software update via the app. Once the update
has been successfully downloaded, you can start in-
stalling it via the HomeConnectapp if you are in your
home network (Wi-Fi). The HomeConnectapp informs
you once installation is successful.
Notes
The software update consists of two steps.
– The first step is the download.
– The second step is the installation on your appli-
ance.
You can continue to use your appliance as normal
while updates are downloading. Depending on your
personal settings in the app, software updates can
also be set to download automatically.
Installation takes a few minutes. You cannot use your
appliance during installation.
We recommend that you install security updates as
soon as possible.
12.6 Remote diagnostics
Customer Service can use Remote Diagnostics to ac-
cess your appliance if you contact them, have your ap-
pliance connected to the HomeConnect server and if
Remote Diagnostics is available in the country in which
you are using the appliance.
Tip: For further information and details about the avail-
ability of Remote Diagnostics in your country, please
visit the service/support section of your local website:
www.home-connect.com
.
12.7 Data protection
Please see the information on data protection.
The first time your appliance is registered on a home
network connected to the Internet, your appliance will
transmit the following types of data to the HomeCon-
nect server (initial registration):
Unique appliance identification (consisting of appli-
ance codes as well as the MAC address of the in-
stalled Wi-Fi communication module).
Security certificate of the Wi-Fi communication mod-
ule (to ensure a secure data connection).
The current software and hardware version of your
appliance.
Status of any previous resetting to factory settings.
This initial registration prepares the HomeConnect func-
tions for use and is only required when you want to use
the HomeConnect functions for the first time.
Note: Please note that the HomeConnect functions can
only be utilised with the HomeConnect app. Information
on data protection can be retrieved in the HomeCon-
nect app.
17
Bekijk gratis de handleiding van Bosch PRS9A6H40A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bosch |
| Model | PRS9A6H40A |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2647 MB |
