Handleiding
Je bekijkt pagina 17 van 60
Operation en-us
17
Automatic panel lock
This function automatically activates the panel lock when
you switch off the cooktop.
The automatic panel lock can be activated in the basic
settings →
Page17
.
8.12 Pause
You can use the function to pause and resume active
cooking processes for up to 10 minutes without changing
the settings you have selected.
You can switch the function on to clean the control panel,
for example.
Activating the Pause function
▶ Press .
a lights up in the cooking zone displays.
a All active cooking processes are stopped. The settings
are retained.
a The function has now been activated.
Deactivating the Pause function
▶ Touch .
a The function is switched off. The cooking processes
continue.
Note:After approximately 10 minutes, the cooking zone
automatically switches off.
8.13 Basic settings
You can configure the basic settings for your appliance to meet your needs.
Basic settings overview
Display Setting Value
Panel lock - Manual.
1
- Automatic.
- Function switched off.
Audible signals - The confirmation signal, the fault signal, and the signal
for incorrect use are deactivated.
- The fault signal is activated.
- The confirmation signal and the signal for incorrect use
are activated.
- All signal tones are switched on
1
.
Volume of the audible signals - Quiet.
- Moderate.
1
- Loud.
Power limitation
This enables you to limit the total power of the
cooktop, if required, due to the circumstances
of your electrical installation. Observe the
regulations of the local electricity providers.
The available settings depend on the maximum
power of the cooktop. You can find more
information on the rating plate. If the function is
switched on and the cooktop has reached the
set power limit, the required and permitted
power level flashes and you cannot select a
higher power level.
The power is increased by 500 W with each level.
– Switched off. Maximum power of the cooktop
1
.
- 1000 W. Lowest power setting.
. - 1500 W.
...
- 3000 W.
. - 3500 W.
- 4000 W.
. - 4500 W.
...
- Maximum power of the cooktop.
Demo mode
Demonstration mode for the cooktop: When
you switch on the cooktop, lights up for a
few seconds and the cooking zones do not
heat up.
- Switched off.
1
- Switched on.
Cookware test
You can use this function to test the quality of
the cookware.
→
"Cookware test", Page25
- Not suitable.
- Not ideal.
- Suitable.
1
Factory setting
Bekijk gratis de handleiding van Bosch NIT8661UC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bosch |
| Model | NIT8661UC |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 6586 MB |
