Handleiding
Je bekijkt pagina 32 van 88
en-us Cleaning and maintenance
32
CAUTION
To avoid risk of burns, let the oven cool down completely
before opening the oven door. The oven cavity is still at
baking temperatures when the door latch is released after
self clean.
1. Press to turn the oven off.
2. Wipe the remaining ash from the oven with a moist
cloth.
Note:After self clean is complete, the self clean function
will be prevented from running again for a period of
24hours.
Steam clean function
This function is ideal at removing light soils from the oven
cavity.
This function is most effective when used regularly. If the
oven cavity has heavy soil use the self clean function
instead.
Starting steam clean
1. Pour a maximum of ½cup of water onto the bottom of
the oven cavity.
2. Press clean once.
a "on" lights up.
a The steam clean timer counts down from 30 minutes.
3. When the steam clean timer has elapsed, continue with
subsequent cleaning.
Subsequently cleaning the oven cavity after the
cleaning function
Clean the oven cavity manually as soon as it has cooled
off after the cleaning function.
NOTICE:
Moisture in the oven cavity can cause damage to the
surfaces.
▶ Remove remaining water from the oven cavity promptly.
▶ Do not leave the remaining water in the oven cavity for
a long time, for example overnight.
▶ Do not operate the appliance when the oven cavity is
still wet or damp.
1. Open the appliance door and remove the remaining
water with an absorbent sponge cloth.
2. Clean the smooth surfaces in the oven cavity with a
dish cloth or a soft brush. Stubborn residues can be
removed using a soft scouring pad.
3. Remove limescale with a cloth soaked in vinegar and
wipe it with clean water. Rub the oven cavity dry with a
soft cloth; also dry under the door seal.
4. Turn the appliance off.
5. Leave the appliance door ajar in the stop position
(approx. 30°) for about one hour to allow the enamel
surfaces in the oven cavity to dry thoroughly.
Maintenance
Replacing an oven light bulb
When the oven light fails you can replace the light bulbs.
WARNING
Light socket is live when door is open if main power supply
is not turned off.
▶ Turn off main power supply at the service panel before
changing the light bulbs.
WARNING
Make sure the appliance and lights are cool and power to
the appliance has been turned off before replacing the
light bulb(s). Failure to do so could result in electrical
shock or burns.
▶ The lenses must be in place when using the appliance.
▶ The lenses serve to protect the light bulb from breaking.
▶ The lenses are made of glass. Handle carefully to avoid
breaking. Broken glass can cause an injury.
Light bulb specifications
Bulb description Bulb image
40Watt, halogen bulb,
G9base, 120Volts
Replacing the oven light
Note:The graphics are representative. Your appliance
may have different graphic appearances.
Requirements
¡ Refer to the oven light bulb chart for the oven light
specification of your oven.
¡ Follow the safety instructions on replacing a light bulb.
→
Page32
1. Turn off the power to the oven at the main power supply
(fuse or breaker box).
2. Remove the oven racks.
Bekijk gratis de handleiding van Bosch HGF1050MUC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bosch |
| Model | HGF1050MUC |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 9505 MB |
