Bosch GLH 18V-60 Professional handleiding

Niet gecategoriseerd

Bosch

255 pagina's

PDF beschikbaar

Handleiding

/ 255

Je bekijkt pagina 15 van 255

English | 15

u Do not modify or open the battery. There is a risk of

short-circuiting.

u The battery can be damaged by pointed objects such

as nails or screwdrivers or by force applied externally.

An internal short circuit may occur, causing the battery to

burn, smoke, explode or overheat.

u Only use the battery in the manufacturer's products.

This is the only way in which you can protect the battery

against dangerous overload.

Protect the battery against heat, e.g. against

continuous intense sunlight, fire, dirt, water

and moisture. There is a risk of explosion and

short-circuiting.

WARNING

Ensure that the coin cell is kept out

of the reach of children. Coin cells

are dangerous.

u Coin cells must never be swallowed or inserted into

any other part of the body. If you suspect that

someone has swallowed a coin cell or that a coin cell

has entered the body in another way, seek medical at-

tention immediately. Swallowing coin cells can result in

severe internal burns and death within 2 hours.

Product Description and

Specifications

Read all the safety and general instructions.

Failure to observe the safety and general in-

structions may result in electric shock, fire

and/or serious injury.

Please observe the illustrations at the beginning of this oper-

ating manual.

Intended Use

The power tool is intended for punching holes in sheet

metal.

Product Features

The numbering of the product features refers to the diagram

of the power tool on the graphics page.

(1)

Punching head

(2)

Reset button

(3)

Status indicator

(4)

USB port

(5)

Rechargeable battery

(6)

Battery release button

(7)

Worklight

(8)

Handle (insulated gripping surface)

(9)

On/off button

(10)

Tension bolt

(11)

Spacer bushing

(12)

Die

(13)

Punch

This accessory is not part of the standard scope of delivery.

Technical Data

Hydraulic cordless punch press GLH18V‑60

Article number

3601JP02..

Rated voltage V 18

Max. pressing force kN 60

Max. sheet thickness

– Steel mm 3

– Stainless steel mm 2.5

Punch head turning range ° 360

USB standard for power tool USB2.0

USBcable for data transfer

(commercially available)

USBType-C®

Weight

kg 2.2

Recommended ambient tem-

perature during charging

°C 0to +35

Permitted ambient temperature

during operation

°C –10to +50

Permitted ambient temperature

during storage

°C −20to +50

Recommended rechargeable

batteries

GBA18V…

ProCORE18V…

Recommended battery chargers GAL18…

GAX18…

GAL36…

A) USBType-C® and USB-C® are trademarks of USB Implementers

Forum.

B) Weight without rechargeable battery

(Weight of rechargeable battery can be found on

http://www.bosch-professional.com)

C) Limited performance at temperatures <0°C

Values can vary depending on the product, scope of application and

environmental conditions. To find out more, visit

www.bosch-professional.com/wac.

Noise/Vibration Information

Noise emission values determined according to

EN62841‑1.

Typically the A-weighted sound pressure level of the product

is less than 70dB(A). The noise level when working can ex-

ceed the declared values.

Wear hearing protection!

Vibration total values a

(triax vector sum) and uncertainty K

determined according toEN62841‑1:

<2.5m/s², K=1.5m/s².

The vibration level and noise emission value given in these

instructions have been measured in accordance with a

standardised measuring procedure and may be used to com-

Bosch Power Tools 1 609 92A B0Z | (22.11.2024)

/ 255

Bekijk gratis de handleiding van Bosch GLH 18V-60 Professional, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.