Bosch GKS 130 Professional handleiding

68 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 11 van 68
Français | 11
Loosen the wing bolt (7) and slide the scale of the parallel
guide (10) through the guide in the base plate (12). Adjust
the desired cutting width as a scale value at the correspond-
ing (9) or (8) cut mark, see the section "Cut marks".
Retighten the wing bolt (7).
Sawing with an auxiliary guide (see figure D)
For working on large workpieces or for cutting straight
edges, you can securely fasten a board or rail to the work-
piece as an auxiliary guide. The circular saw can be guided
along the path of this auxiliary guide with the base plate.
Maintenance and Service
Maintenance and Cleaning
u Pull the plug out of the socket before carrying out any
work on the power tool.
u To ensure safe and efficient operation, always keep
the power tool and the ventilation slots clean.
In order to avoid safety hazards, if the power supply cord
needs to be replaced, this must be done by Bosch or by an
after-sales service centre that is authorised to repair Bosch
power tools.
The retracting blade guard must always be able to move
freely and retract automatically. It is therefore important to
keep the area around the retracting blade guard clean at all
times. Remove dust and chips with a paintbrush.
Non-coated saw blades can be protected against corrosion
using a thin layer of acid-free oil. Remove the oil again before
sawing as failure to do so will stain the wood.
Resin or glue residue on the saw blade has a detrimental ef-
fect on the quality of the cut. You should therefore clean saw
blades straight after use.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Malaysia
Robert Bosch Sdn. Bhd.(220975-V) PT/SMY
No. 8A, Jalan 13/6
46200 Petaling Jaya
Selangor
Tel.: (03) 79663194
Toll-Free: 1800 880188
Fax: (03) 79583838
E-Mail: kiathoe.chong@my.bosch.com
www.bosch-pt.com.my
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Disposal
The power tool, accessories and packaging should be re-
cycled in an environmentally friendly manner.
Do not dispose of power tools along with
household waste.
Français
Consignes de sécurité
Avertissements de sécurité généraux pour l’outil
électrique
AVERTISSE-
MENT
Lire tous les avertissements de sé-
curité, les instructions, les illustra-
tions et les spécifications fournis
avec cet outil électrique. Ne pas suivre les instructions
énumérées ci-dessous peut provoquer un choc électrique,
un incendie et/ou une blessure sérieuse.
Conserver tous les avertissements et toutes les instruc-
tions pour pouvoir s'y reporter ultérieurement.
Le terme "outil électrique" dans les avertissements fait réfé-
rence à votre outil électrique alimenté par le secteur (avec
cordon d’alimentation) ou votre outil électrique fonctionnant
sur batterie (sans cordon d’alimentation).
Sécurité de la zone de travail
u Conserver la zone de travail propre et bien éclairée.
Les zones en désordre ou sombres sont propices aux ac-
cidents.
u Ne pas faire fonctionner les outils électriques en at-
mosphère explosive, par exemple en présence de li-
quides inflammables, de gaz ou de poussières. Les ou-
tils électriques produisent des étincelles qui peuvent en-
flammer les poussières ou les fumées.
u Maintenir les enfants et les personnes présentes à
l’écart pendant l’utilisation de l’outil électrique. Les
distractions peuvent vous faire perdre le contrôle de l’ou-
til.
Sécurité électrique
u Il faut que les fiches de l’outil électrique soient adap-
tées au socle. Ne jamais modifier la fiche de quelque
façon que ce soit. Ne pas utiliser d’adaptateurs avec
des outils électriques à branchement de terre. Des
fiches non modifiées et des socles adaptés réduisent le
risque de choc électrique.
u Éviter tout contact du corps avec des surfaces reliées
à la terre telles que les tuyaux, les radiateurs, les cui-
Bosch Power Tools 1 609 92A 8C7 | (16.11.2022)

Bekijk gratis de handleiding van Bosch GKS 130 Professional, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkBosch
ModelGKS 130 Professional
CategorieNiet gecategoriseerd
TaalNederlands
Grootte13835 MB