Bosch GKE 18V-20 Professional handleiding

Niet gecategoriseerd

Bosch

391 pagina's

PDF beschikbaar

Handleiding

/ 391

Je bekijkt pagina 31 van 391

English | 31

Inserting the Battery

Push the charged battery into the battery holder until it

clicks into place.

Removing the Battery

To remove the rechargeable battery, press the battery re-

lease button and pull the battery out. Do not use force to do

this.

The rechargeablebattery has two locking levels to prevent

the battery from falling out if the battery releasebutton is

pressed unintentionally. The rechargeable battery is held in

place by a spring when fitted in the power tool.

Battery charge indicator

The green LEDs on the battery charge indicator indicate the

state of charge of the battery. For safety reasons, it is only

possible to check the state of charge when the power tool is

not in operation.

Press the button for the battery charge indicator or to show

the state of charge. This is also possible when the battery is

removed.

If no LED lights up after pressing the button for the battery

charge indicator, then the battery is defective and must be

replaced.

Battery model GBA 18V...

LED Capacity

3× continuous green light 60–100%

2× continuous green light 30–60%

1× continuous green light 5–30%

1× flashing green light 0–5%

Battery model ProCORE18V...

LED Capacity

5 × continuous green light 80–100%

4 × continuous green light 60–80%

3 × continuous green light 40–60%

2 × continuous green light 20–40%

1 × continuous green light 5–20%

1 × flashing green light 0–5%

Recommendations for Optimal Handling of the

Battery

Protect the battery against moisture and water.

Only store the battery within a temperature range of −20 to

50°C. Do not leave the battery in your car in the summer, for

example.

Occasionally clean the ventilation slots on the battery using a

soft brush that is clean and dry.

A significantly reduced operating time after charging indic-

ates that the battery has deteriorated and must be replaced.

Follow the instructions on correct disposal.

Battery Maintenance

Use the following procedures to enable optimum usage of

the battery:

– Protect the battery against moisture and water.

– Store the machine and battery only within a temperature

range between –20°C and 50°C . As an example, do not

leave the battery in the car in summer.

– The battery must not be stored within the product but

stored separately.

– Do not leave the battery in the product in direct sunlight.

– The ideal storage condition for the battery is 5°C.

– Occasionally clean the venting slots of the battery using a

soft, clean and dry brush.

A significantly reduced working period after charging indic-

ates that the battery is used and must be replaced.

Assembly

Mounting and Tensioning the Saw Chain (see

figuresB1 – B7)

u Wear PPE before maintaining or changing the saw

chain.

u Do not use any tools for assembly.

u Using the pruner saw with a misaligned or improperly

tensioned chain may result in chain breakage, kick-

back, and/or injury. A correctly aligned and tensioned

chain optimises product performance and extends its ser-

vice life.

u Upon initial operation, new chains can lengthen con-

siderably.

u Avoid tensioning the chain if it is hot, as this will cause

the chain to become overtensioned and fit too tightly

against the chain bar when it cools down.

u Use only chains with a drive link thickness of 1.1mm.

– Place the pruner saw on any suitable flat surface.

– Make sure that the tensioning wheel (2) has been turned

fully in anticlockwise direction.

– Slot in the saw chain(12) in the gap of the chain

bar(13). Ensure the saw chain is in the correct running

direction by comparing the saw chain with the symbol for

rotation and cutting direction(16).

– Place the chain bar(13) on the fastening bolt(17) and

place the chain links around the drive sprocket(20).

– Check if all parts are positioned properly and hold the

chain bar and the chain in this position.

– Rotate the tensioning wheel(2) clockwise until the chain

is partially tensioned.

Bosch Power Tools F 016 L94 966 | (03.04.2025)

/ 391

Bekijk gratis de handleiding van Bosch GKE 18V-20 Professional, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.