Bosch GKE 18V-15 Professional handleiding

Niet gecategoriseerd

Bosch

391 pagina's

PDF beschikbaar

Handleiding

/ 391

Je bekijkt pagina 34 van 391

34 | English

Problem Possible Cause Corrective Measure

Chain tension too high Release saw chain; see also (see "Mounting and

Tensioning the Saw Chain (see figuresB1 – B7)",

page31).

Saw chain will not

move

Battery discharged Recharge battery; see also "Battery Charging"

Power tool defective Contact your Bosch Service Centre

Area under SDS cover clogged See "Maintenance and Cleaning"

No oil on saw chain Retension saw chain; see also(see "Mounting and

Tensioning the Saw Chain (see figuresB1 – B7)",

page31) and oil saw chain (see also "Saw chain

lubrication")

Pruner saw operates

intermittently

Internal loose contact Contact your Bosch Service Centre

On/Off switch (8) defective

Contact your Bosch Service Centre

Saw chain dry No oil on saw chain Oil saw chain; see also "Saw chain lubrication"

Oil seal or oil passage clogged Clean oil seal and oil passage

Oil reservoir empty Refill oil reservoir; see also (see "Filling the oil

reservoir (see figureC)", page32)

Saw chain/guide bar

hot

No oil on saw chain Oil saw chain; see also "Saw chain lubrication"

Chain tension too high Release saw chain; see also(see "Mounting and

Tensioning the Saw Chain (see figuresB1 – B7)",

page31)

Dull saw chain Replace saw chain

Pruner saw rips, vi-

brates or does not saw

properly

Saw chain tension too loose Release saw chain; see also(see "Mounting and

Tensioning the Saw Chain (see figuresB1 – B7)",

page31)

Dull saw chain Replace saw chain

Saw chain worn out Replace saw chain

Saw chain teeth are facing in the wrong direction Reassemble with saw chain in correct direction

Excessive vibrations/

noise

Power tool defective Contact your Bosch Service Centre

Sawing time per bat-

tery charge too low

Too much friction, due to lack of lubricant Oil saw chain; see also "Saw chain lubrication"

Saw chain dirty Clean saw chain

Poor sawing technique see Working with the pruner saw

Battery not fully charged Recharge battery; see also (see "Charging the bat-

tery", page30)

Battery out of the allowable temperature range Allow battery to warm naturally to room temperat-

ure (within battery operating temperature 0–

45°C)

The saw chain is run-

ning slow

Battery discharged Recharge battery; see also "Battery Charging"

Battery out of the allowable temperature range Allow battery to warm naturally to room temperat-

ure (within battery operating temperature 0–

45°C)

Excess oil Residual oil from chain and sprocket area

See "storage" figure M and (see "Maintenance and

Service", page34)

Maintenance and Service

Maintenance and Cleaning

u Before any work on the garden product itself (e.g.

maintenance, tool change, etc.) as well as during

transport and storage, remove the battery from the

garden product. There is danger of injury when uninten-

tionally actuating the On/Off switch.

u Always wear suitable clothing and personal protective

equipment.

F 016 L94 966 | (03.04.2025) Bosch Power Tools

/ 391

Bekijk gratis de handleiding van Bosch GKE 18V-15 Professional, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.