Bosch GKE 18V-15 Professional handleiding

Niet gecategoriseerd

Bosch

391 pagina's

PDF beschikbaar

Handleiding

/ 391

Je bekijkt pagina 27 van 391

English | 27

u Do not use a battery pack or tool that is damaged or

modified. Damaged or modified batteries may exhibit

unpredictable behaviour resulting in fire, explosion or risk

of injury.

u Do not expose a battery pack or tool to fire or excess-

ive temperature. Exposure to fire or temperature above

130°C may cause explosion.

u Follow all charging instructions and do not charge the

battery pack or tool outside the temperature range

specified in the instructions. Charging improperly or at

temperatures outside the specified range may damage

the battery and increase the risk of fire.

Service

u Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

u Never service damaged battery packs. Service of bat-

tery packs should only be performed by the manufacturer

or authorized service providers.

Pruner Saw Safety Warnings

u Keep all parts of the body away from the saw chain

when the pruner saw is operating. Before you start

the pruner saw, make sure the saw chain is not con-

tacting anything. A moment of inattention while operat-

ing pruner saws may cause entanglement of your clothing

or body with the saw chain.

u The tool is designed for use with both hands. Always

hold the pruner saw with one hand on the rear handle

and the other hand on the auxiliary handle

(seefigureF).

u Hold the pruner saw by insulated gripping surfaces

only, because the saw chain may contact hidden wir-

ing. Saw chains contacting a “live” wire may make ex-

posed metal parts of the power tool “live” and could give

the operator an electric shock.

u Wear eye protection. Further protective equipment

for hearing, head, hands, legs and feet is recommen-

ded. Adequate protective equipment will reduce personal

injury from flying debris or accidental contact with the

saw chain.

u Do not operate a pruner saw in a tree, on a ladder,

from a rooftop, or any unstable support. Operation of a

pruner saw in this manner could result in serious personal

injury.

u Always keep proper footing and operate the pruner

saw only when standing on fixed, secure and level sur-

face. Slippery or unstable surfaces may cause a loss of

balance or control of the pruner saw.

u When cutting a limb that is under tension be alert for

spring back. When the tension in the wood fibres is re-

leased the spring loaded limb may strike the operator

and/or throw the pruner saw out of control.

u Use extreme caution when cutting brush and saplings.

The slender material may catch the saw chain and be

whipped toward you or pull you off balance.

u Carry the pruner saw by the rear handle with the pru-

ner saw switched off and away from your body. When

transporting or storing the pruner saw, always fit the

chain cover. Proper handling of the pruner saw will re-

duce the likelihood of accidental contact with the moving

saw chain.

u Follow instructions for lubricating, chain tensioning

and changing the bar and chain. Improperly tensioned

or lubricated chain may either break or increase the

chance for kickback.

u Cut wood only. Do not use pruner saw for purposes

not intended. For example: do not use pruner saw for

cutting metal, plastic, masonry or non-wood building

materials. Use of the pruner saw for operations different

than intended could result in a hazardous situation.

u This pruner saw is not intended for felling trees. Use of

the pruner saw for operations different than intended

could result in serious injury to the operator or bystand-

ers.

u Follow all instructions when clearing jammed mater-

ial, storing or servicing the pruner saw. Make sure the

switch is off and the battery pack is removed.

u Causes and operator prevention of kickback:

– Kickback may occur when the nose or tip of the guide

bar touches an object, or when the wood closes in and

pinches the saw chain in the cut.

– Tip contact in some cases may cause a sudden reverse

reaction, kicking the guide bar up and back towards the

operator.

– Pinching the saw chain along the top of the guide bar

may push the guide bar rapidly back towards the oper-

ator.

– Either of these reactions may cause you to lose control

of the saw which could result in serious personal injury.

Do not rely exclusively upon the safety devices built into

your pruner saw. As a pruner saw user, you should take

several steps to keep your cutting jobs free from accident

or injury.

Kickback is the result of tool misuse and/or incorrect op-

erating procedures or conditions and can be avoided by

taking proper precautions as given below:

u Maintain a firm grip, with thumbs and fingers encirc-

ling the pruner saw handles, with both hands on the

saw and position your body and arms to allow you to

resist kickback forces. Kickback forces can be con-

trolled by the operator, if proper precautions are taken.

Do not let go of the pruner saw.

u Do not overreach and do not cut above shoulder

height. This helps prevent unintended tip contact and en-

ables better control of the pruner saw in unexpected situ-

ations.

u Only use replacement guide bars and saw chains spe-

cified by the manufacturer. Incorrect replacement

guide bars and saw chains may cause chain breakage

and/or kickback.

Bosch Power Tools F 016 L94 966 | (03.04.2025)

/ 391

Bekijk gratis de handleiding van Bosch GKE 18V-15 Professional, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.