Bosch FLEXIDOME panoramic 5100i handleiding

Bewakingscamera

Bosch

64 pagina's

PDF beschikbaar

Handleiding

FLEXIDOME panoramic 5100i | FLEXIDOME

panoramic 5100i IR

Browser connection | en 9

Bosch Security Systems B.V.

User manual

2024-11 | V03 | F.01U.385.628

2 Browser connection

A computer with a web browser (Google Chrome, Microsoft Edge, or Mozilla Firefox) is used

to receive live images, control the unit, and replay stored sequences. The unit is configured

over the network using the browser.

2.1 System requirements

Our recommendations are:

– Computer with dual core HyperThreading processor or better

– Graphic card with performance that matches or is better than the resolution of the

camera

– Windows10 or later

– Network access

– Google Chrome, Microsoft Edge, or Mozilla Firefox

- or -

Application software, for example, VideoSecurityClient or BVMS.

2.2 Establishing the connection

The unit must have a valid IP address and a compatible subnet mask to operate on your

network. By default, DHCP is pre-set at the factory to On and so your DHCP server assigns

an IP address. With no DHCP server the default address is 192.168.0.1

The Project Assistant app or Configuration Manager (version 7.50 or higher) can be used to

find the IP address. Download the software from https://downloadstore.boschsecurity.com:

1. Start the web browser.

2. Enter the IP address of the device as the URL.

3. During the initial installation, confirm any security questions that show.

If a RADIUS server is used for network access control (802.1x authentication), you must

configure the device before the device can communicate with the network.

To configure the device, connect it directly to a computer using a network cable and then

set the service-level password.

Note:

If you cannot connect, the unit may have reached its maximum number of connections.

Depending on the device and network configuration, each unit can have up to 50 web

browser connections, or up to 100 connections via BVMS.

2.3 Password protection in camera

The device is password-protected. The first time that any user accesses the device, the

device will prompt the user to set a password at the service level.

The camera requires a strong password. Follow the prompts in the dialog box, which

specifies what is required. The system measures the strength of the password that you

enter.

Make sure the password obeys these conditions:

– 8 to 19 characters in length

– Upper and lower case letters

– Minimum of 1 digit

– Minimum of 1 special character

These special characters are not allowed: '@', '&', '<', '>', ':', '+'

Bekijk gratis de handleiding van Bosch FLEXIDOME panoramic 5100i, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.