Handleiding
Je bekijkt pagina 13 van 28
Cleaning and servicing en
Indicator Basic setting Selection Description
Button tone = off
= on
1
Switching the button tones on or off
Note: You cannot switch off the button tone for and .
Demo mode = off
1
= on
The appliance is switched off. You can use the buttons
and the display. The buttons have no function, meaning
that no power arises for the microwave, for example. Deal-
ers predominantly use the demo mode.
While the demo mode is activated, the display shows .
12.2 Changing basic settings
Requirement: The appliance is switched off.
1.
Press and hold and for a few seconds.
The display shows for the first basic setting.
2.
To edit the basic setting, press .
The selected setting lights up in the display.
3.
Use the rotary selector to set the required selection.
4.
To accept the basic setting, press .
5.
To exit the basic setting, press .
6.
Use the rotary selector to change to the basic setting
.
7.
To edit the basic setting, press .
The selected setting lights up in the display.
8.
Use the rotary selector to set the required selection.
9.
To accept the basic setting, press .
10.
To exit the basic setting, press .
11.
To exit the basic settings menu, press again.
Tip: You can change this setting again at any time.
12.3 Changing the signal duration
When your appliance is switched off, you hear an aud-
ible signal. You can change the duration of the signal.
Press and hold for approx. sixseconds.
The signal duration switches between short and long.
The appliance applies the signal duration and dis-
plays the time.
12.4 Changing the time
You can change the time on the clock at any time.
1.
Press .
2.
Set the time using the rotary selector.
3.
Press to confirm the time.
12.5 Hiding the clock in low power mode
You can hide the clock in low power mode.
1.
Press .
2.
Press .
Note: Press to display the clock again.
Cleaning and servicing13 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
13.1 Cleaning products
Only use suitable cleaning agents.
WARNING‒Risk of electric shock!
An ingress of moisture can cause an electric shock.
Do not use steam- or high-pressure cleaners to clean
the appliance.
ATTENTION
Unsuitable cleaning agents damage the surfaces of the
appliance.
Do not use harsh or abrasive cleaning products.
Do not use cleaning products with a high alcohol con-
tent.
Do not use hard scouring pads or cleaning sponges.
Do not use any special cleaners for cleaning the ap-
pliance while it is hot.
Only use glass cleaners, glass scrapers or stainless
steel care products if recommended in the cleaning
instructions for the relevant part.
Salt contained in new sponge cloths may damage sur-
faces.
Wash new sponge cloths thoroughly before use.
You can find out which cleaning products are suitable
for each surface or part of the appliance in the indi-
vidual cleaning instructions.
13.2 Cleaning the appliance
Clean the appliance as specified. This will ensure that
the different parts and surfaces of the appliance are not
damaged by incorrect cleaning or unsuitable cleaning
products.
WARNING‒Risk of burns!
The appliance and its parts that can be touched be-
come hot during use.
Caution should be exercised here in order to avoid
touching heating elements.
Young children under 8 years of age must be kept
away from the appliance.
1
Factory setting (may vary according to model)
13
Bekijk gratis de handleiding van Bosch BEL653MB3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bosch |
| Model | BEL653MB3 |
| Categorie | Magnetron |
| Taal | Nederlands |
| Grootte | 2740 MB |
