Bosch Air 6000i handleiding
Handleiding
Je bekijkt pagina 38 van 144
Moving and storage
Air 6000 – 6721876907 (2024/04)
38
▶ Insert the new filter into the appliance.
▶ Reattach the cover.
▶ Insert the plug of the air purifier in the power socket.
▶ Touch the power button to switch on the appliance.
▶ Touch and hold the filter status check/reset button for 3 seconds
to reset the filter replacement counter.
▶ Wash your hands after replacing the filter.
Note:
Do not smell the filter as it has collected pollutants from the air.
5.5 Resetting the filter
When the filter lifetime counter reaches 0%, the screen displays the
message "Filter status 0%" reminding the user to replace the filter. The
message disappears when pressing the filter button and will be
displayed again the next time the appliance is turned on.
[Figure 31 Message indicating the filter needs to be replaced]
The filter can be replaced before the filter lifetime warning is displayed.
The filter lifetime counter needs to be reset manually after its
replacement:
▶ Touch the power button to turn off the appliance and unplug it
from the power socket.
▶ Insert the plug in the power socket.
▶ Long press the filter button to reset the filter lifetime counter.
The interface changes between the tree messages and then returns
to the original screen.
[Figure 32 Reseting filter messages]
To check the filter status, press the filter button . The remaining
lifetime of the filter will be displayed and then returns to the previous
screen.
6 Moving and storage
Moving
• Use two hands to hold the appliance when moving it.
Storage
▶ Turn off the air purifier and unplug it from the power socket.
▶ Clean the air purifier, the particle sensor and the surface of the filter
( Chapter 5 "Cleaning and maintenance", Page 37).
▶ Let all parts airdry before storing.
▶ Wrap the filter in air-tight plastic covers.
▶ Store the air purifier and the filter in a cool, dry location.
▶ Wash your hands after handling the filter.
7Troubleshooting
This chapter summarizes the most common issues that may occur with
the appliance. If the solution is not found in the table below, please
contact an authorized service technician.
Problem Possible solution
The airflow that comes out of the
air outlet is significantly weaker
than before.
The surface of the filter is dirty.
Clean the surface of the filter
( Chapter 5 "Cleaning and
maintenance").
The air quality does not improve,
even though the appliance has
been operating for a long time.
• Check if the plastic cover is
removed from the filter.
• The filter has not been placed in
the appliance. Make sure that
the filter is properly installed.
• The particle sensor is wet. The
humidity level in the room is
high and causes condensation.
Make sure that the particle
sensor is clean and dry
( Chapter 5 "Cleaning and
maintenance").
• Room size is large or the
outdoor air quality is poor. For
optimum purification
performance, close the doors
and windows when operating
the air purifier.
• There are indoor pollutants.
For example, smoking,
cooking, incense, perfume or
alcohol.
• Filter has reached the end of
life. Replace the filter with a
new one.
The color of the air quality light
always stays the same.
The particle sensor is dirty. Clean
the particle sensor ( Chapter 5
"Cleaning and maintenance"). If
the air quality is good, the light
should be blue at all times.
Bekijk gratis de handleiding van Bosch Air 6000i, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bosch |
| Model | Air 6000i |
| Categorie | Luchtreiniger |
| Taal | Nederlands |
| Grootte | 22386 MB |
