Boretti Milano MLI94D handleiding
Handleiding
Je bekijkt pagina 60 van 72
60
After cleaning, replace the inner glass pane
When replacing the inner glass pane, make sure that:
You replace the pane correctly, as shown. The pane must be in the
position described below in order to fit into the door and to ensure that
the oven operates safely and correctly.
To reassemble the inner pane of the oven door operate as follows:
1. Make sure the door is locked open (see fig. 7.10c).
2. Replace the inner pane:
* Check that the four rubber pads are in place (“D” in fig. 7.13a).
Important!
It is advisable, while removing the glass, to keep pressed in
position the four rubber pads “D” (fig. 7.13a), pressed by a finger,
to avoid breakage or slippage of the rubber pads themselves.
* Check that you are holding the pane the correct way.
You should be able to read the wording on it as it faces you.
* Insert the pane in the left “E” and right “F” slide guides (fig. 7.13b),
and gently slide it to the retainers “H” (fig. 7.13c).
* Gently push the air deflector “G” back into place (fig. 7.13d).
* Unlock the oven door by opening it completely and closing the lever
“A” on the left and right hinges (fig. 7.13e).
ENBoretti Milano / User guide - Installation advice
Bekijk gratis de handleiding van Boretti Milano MLI94D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Boretti |
| Model | Milano MLI94D |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6251 MB |