Handleiding
Je bekijkt pagina 7 van 48
Safety
EN
bora.com 7
2.3.2
Safety information for cooktop
installation
ö
DANGER
Risk of electric shock from damaged power
supply cable
If the power supply cable is damaged (e.g. during
installation or by coming into contact with hot
cooking surfaces), this can cause an (lethal) electric
shock.
u
Make sure that the connection cable does not
become trapped or damaged.
u
Make sure that the power supply cable does not
come into contact with hot cooking surfaces.
ö
DANGER
Risk of electric shock from incorrect mains
connection
Connecting the appliance to the mains incorrectly
poses a risk of electric shock.
u
Make sure that the appliance has a fixed
connection to the mains voltage.
u
Make sure that the appliance is connected to a
properly installed protective conductor system.
u
Make sure that technical equipment is provided
to enable all of the appliance’s poles to be
disconnected from the mains with a contact
opening width of at least 3mm (circuit breaker
and automatic circuit breakers, fuses, contactor).
ö
DANGER
Risk of explosion and asphyxiation from gas
Leaking gas can lead to an explosion and result in
severe injuries and property damage, or
asphyxiation.
u
Keep sources of ignition (naked flames, electric
fires) away and do not operate any light switches,
or switches on electrical appliances.
u
Do not remove plugs from sockets (risk of
sparking).
u
Close the gas supply immediately and turn off the
mains supply.
u
Ensure there is a good supply of fresh air (open
doors and windows).
u
Plug any leaks immediately.
u
Before connecting the appliance, check that the
appliance settings comply with local connection
requirements (gas type and pressure).
ö
WARNING
Risk of burns from wrongly placed control
knobs
If control knobs are not fitted according to the
installation instructions, they can become hot.
Touching the hot control knobs can cause burns.
u
Control knobs must be fitted at least 10cm from
the edge of the cooktop.
u
If it is not possible to maintain a distance of at
least 10cm, measures must be put in place to
protect the control knobs from the heat.
ö
WARNING
Risk of injury from incorrect gas installation
Failure to observe the gas installation instructions
can lead to injury.
u
Gas installation, appliance installation and
replacing the gas nozzles, as well as changing the
gas type and pressure, may only be carried out by
reliable trained specialists, who are familiar with
and comply with the standard national
regulations and supplementary regulations of the
local utility companies.
u
Observe the special instructions on changing the
gas type and pressure and the specifications for
changing the gas nozzles in the nozzle table (see
Operating instructions).
u
BORA gas cooktops must only be used with BORA
cooktop extractors.
2.4
Safety instructions – repairs,
servicing and spare parts
ö
DANGER
Risk of injury when carrying out repairs
Insufficient expertise can lead to injury when
carrying out repairs.
u
The appliance must only be repaired and serviced
by trained specialists who are familiar with and
comply with the standard national regulations
and supplementary regulations of the local utility
companies.
u
Safely disconnect the appliance from the mains
supply.
u
Work on electrical components must only be
conducted by trained electrical personnel.
u
A damaged power supply cable must be replaced
by a suitable power supply cable.
Bekijk gratis de handleiding van Bora Professional 3.0 PKA3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bora |
| Model | Professional 3.0 PKA3 |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 10155 MB |
