Handleiding
Je bekijkt pagina 32 van 56
Functions and operation
EN
32 bora.com
T
If no time is set within 4 seconds, the cooking zone timer is
deactivated. The control knob display goes back to the current
cooking session.
Setting the time and starting the cooking zone timer
Fig.5.37
Turning the knob ring clockwise
Fig.5.38
Turning the knob ring anticlockwise
Setting range 0–10min 10–20min 20–120min
Setting accuracy 30sec. 1min 5min
Tab.5.10
Setting accuracy
T
After confirming with a touch command, an acoustic signal is
heard, the cooking zone timer is activated and the set time starts
to count down.
T
The control knob display changes to the current cooking session
and the timer symbol is displayed.
T
The set power level and the remaining time are shown alternately
in the control knob display for 3 seconds.
T
When 2 minutes are left, the remaining time is shown in seconds.
T
Once the remaining time is less than 5 seconds, the remaining
time flashes.
Changing the active cooking zone timer
u
Repeat the steps to activate the cooking zone timer.
u
Change the set time and restart the cooking zone timer.
Switching the cooking zone timer off early
u
Repeat the steps to activate the cooking zone timer.
u
Reduce the set time to and confirm.
T
Active cooking sessions are resumed unchanged.
Or
u
Turn the knob ring to power level appears in the cooktop
extractor control knob display.
T
An acoustic signal sounds, the cooking zone is switched off and
the active cooking zone timer finishes.
Lapsed cooking zone timers
T
The cooking zone switches off automatically.
T
An acoustic signal is heard.
T
The control knob display shows and the timer symbol
flashing.
T
After 5 seconds the acoustic signal and the flashing display are
automatically deactivated.
The flashing display and acoustic signal can be stopped early with a
touch command on the control knob.
5.6.5
Automatic heat up function
When the automatic heat up function is activated, the cooking zone
works at full power for a certain time and is then automatically reset
to the previously set level.
Power level (continuous cooking
level)
Cooking times in min:sec
00:40
1:00
2:00
3:00
4:20
7:00
2:00
3:00
Tab.5.11
Overview of induction and gas cooktop heating times
Power level (continuous cooking
level)
Cooking times in min:sec
1:00
3:00
4:48
6:30
8:30
2:30
3:30
4:30
Tab.5.12
Overview of Hyper and HiLight cooktop heating times
If the cooking zone power level is increased while the
automatic heat up function is active, the automatic heat up
function remains active. The heating time is adjusted
accordingly.
If the cooking zone power level is decreased while the
automatic heat up function is active, the automatic heat up
function is deactivated.
Activating the automatic heat up function
Fig.5.39
Activating the automatic heat up function
Bekijk gratis de handleiding van Bora PKFI3AB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bora |
| Model | PKFI3AB |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 9839 MB |
