Handleiding
Je bekijkt pagina 35 van 56
Configuration menu
EN
bora.com 35
T
The menu can be exited at any point by means of a long touch.
Settings that have not yet been confirmed will be lost.
or
T
If no settings are changed in a menu or submenu item for 2
minutes, the configuration menu is closed automatically and the
display goes out. The settings made are saved automatically.
6.3
Initial operation
When used for the first time, the system must be configured. It is
essential to select the correct settings from the menu items for the
basic configuration.
6.3.1
Basic configuration
Menu item
: exhaust air or recirculation mode (incl.
filter unit selection)
In recirculation mode, the correct selection of the filter unit
automatically sets the maximum recirculation filter service life and
adjusts the filter timer accordingly.
Setting Operating mode Filter unit (service
life)
Exhaust air mode No filter required
Recirculation mode ULB3X (600 h) (factory
setting)
Recirculation mode ULBF (300h)
Tab.6.3
Exhaust air or recirculation mode and filter unit selection
Menu item : operation with or without a wall sleeve
(only in exhaust air mode)
If a wall sleeve is used in exhaust air mode, when activating the
cooktop extractor a higher power level is automatically and
temporarily activated so that the wall sleeve opens properly (wall
sleeve function).
Prerequisite: The exhaust air mode setting was selected in menu item
.
Setting Wall sleeve
Operation without wall sleeve
Operation with wall sleeve (factory setting)
Tab.6.4
Operation with or without a wall sleeve
Menu item : Number of fans installed
If an additional fan is used when the system is installed, it must be
activated in the menu. (Not applicable in the case of ULIE additional
duct fan)
Setting Number of fans
One fan connected (factory setting)
Two fans connected
Tab.6.5
Number of fans installed
6.4
Description of the other menu
items
6.4.1
Menu item C0: Volume of the
acoustic signals
Setting Acoustic signal volume
100% (factory setting)
10%
20%
30%
40%
50%
60%
70%
80%
90%
Tab.6.6
Acoustic signal volume
6.4.2
Menu item C1: Demo mode
In demo mode all control knob functions are available and the
electrical cover flap and fan are operative (exception: automatic after-
run function). The cooktop heating function is deactivated. Demo
mode is used, for example, for exhibitions. If the system is in demo
mode,
is shown in all control knob displays for 3 seconds after the
appliance is switched on.
Setting Operating mode
Normal operation (factory setting)
Demo mode
Tab.6.7
Normal operation or demo mode
6.4.3
Menu item C2: Speed of the cover
flap motors
Setting Cover flap speed
100%
40%
46.7%
53.4%
60%
66.7%
73.3% (factory setting)
80%
86.7%
93.3%
Tab.6.8
Speed of the cover flap motors
Bekijk gratis de handleiding van Bora PKCB3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bora |
| Model | PKCB3 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 10414 MB |
