Handleiding
Je bekijkt pagina 32 van 56
Functions and operation
EN
32 bora.com
T
The set power level and the remaining time are shown alternately
in the control knob display for 3 seconds.
T
When 2 minutes are left, the remaining time is shown in seconds.
T
Once the remaining time is less than 5 seconds, the remaining
time flashes.
Changing the active cooking zone timer
u
Repeat the steps to activate the cooking zone timer.
u
Change the set time and restart the cooking zone timer.
Switching the cooking zone timer off early
u
Repeat the steps to activate the cooking zone timer.
u
Reduce the set time to and confirm.
T
Active cooking sessions are resumed unchanged.
Or
u
Turn the knob ring to power level appears in the cooktop
extractor control knob display.
T
An acoustic signal sounds, the cooking zone is switched off and
the active cooking zone timer finishes.
Lapsed cooking zone timers
T
The cooking zone switches off automatically.
T
An acoustic signal is heard.
T
The control knob display shows and the timer symbol
flashing.
T
After 5 seconds the acoustic signal and the flashing display are
automatically deactivated.
The flashing display and acoustic signal can be stopped early with a
touch command on the control knob.
5.6.5
Automatic heat up function
When the automatic heat up function is activated, the cooking zone
works at full power for a certain time and is then automatically reset
to the previously set level.
Power level (continuous cooking
level)
Cooking times in min:sec
00:40
1:00
2:00
3:00
4:20
7:00
2:00
3:00
Tab.5.11
Overview of induction and gas cooktop heating times
Power level (continuous cooking
level)
Cooking times in min:sec
1:00
3:00
4:48
6:30
8:30
2:30
3:30
4:30
Tab.5.12
Overview of Hyper and HiLight cooktop heating times
If the cooking zone power level is increased while the
automatic heat up function is active, the automatic heat up
function remains active. The heating time is adjusted
accordingly.
If the cooking zone power level is decreased while the
automatic heat up function is active, the automatic heat up
function is deactivated.
Activating the automatic heat up function
Fig.5.39
Activating the automatic heat up function
T
An acoustic signal is heard, the automatic heat up function is
activated and the corresponding timer counts down.
T
The control knob display shows the heat-up symbol and the set
power level (e.g.
).
Deactivating the automatic heat up function early
u
The activated automatic heat up function will end prematurely if
you
u
reduce the power level (continuous cooking level);
u
set the power level;
u
the power setting the power setting;
u
activate the power setting;
u
switch off the cooktop.
Time lapsed
T
When the heat up time has lapsed, the previously set continuous
cooking level will be activated.
T
An acoustic signal is heard.
T
The heat-up symbol will no longer be displayed.
5.6.6
Cleaning function
The cleaning function adjusts the Tepan stainless steel grill to a
constant temperature of 70°C, which is perfect for cleaning. This
temperature is then maintained for 10 minutes.
Bekijk gratis de handleiding van Bora PKCB3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bora |
| Model | PKCB3 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 10414 MB |
