Handleiding
Je bekijkt pagina 31 van 56
User menu
EN
bora.com 31
Aborting the basic configuration manually
u
Long press on the menu button .
If you wish to abort the basic configuration process ahead of time,
e.g. because fans are not correctly recognised, all menu items that
have not been fully completed must be run through again at a later
date.
Completing the basic configuration
When you have successfully completed all of the steps in the basic
configuration menu:
u
Tap the flashing navigation arrow
T
The system adopts and saves the settings made and the standard
display is shown.
If this process is interrupted before it is completed, the basic
configuration must be continued from where you left off the
next time the menu is called up.
If the basic configuration has not been completed
successfully, the corresponding request will be repeated
every time the menu is called up.
5.4
Standard menu
5.4.1
Menu item 1: volume of the
acoustic signals
The current set volume is shown in the 7-segment display above the
slider when the menu item is called up.
Setting the acoustic signal volume:
u
Swipe upwards or downwards until the required volume is
reached
or
u
tap or until the required volume is reached
u
Confirm and save the setting.
Safety-relevant acoustic signals are always emitted with the
volume at 100%.
The acoustic signals from the cooking zone timer and short-
time timer are always emitted with the volume at 100%.
Fig.5.2
Menu item 1: volume of the acoustic signals
5.4.2
Menu item 2: Child lock
With menu item 2 the child lock can be permanently switched on or
off. The setting continues to apply next time the system is started up.
Permanently activating the child lock
u
Tap the top slider segment
T
The display shows .
u
Confirm and save the setting.
T
The child lock is permanently activated.
Permanently deactivating the child lock
u
Tap the bottom slider segment
T
The display shows .
u
Confirm and save the setting.
T
The child lock is permanently deactivated.
Fig.5.3
Menu item 2: Child lock
5.4.3
Menu item 3: Automatic extractor
control
With menu item 3 the automatic extractor function can be
permanently switched on or off. The setting is immediately adopted.
Permanently activating the automatic extractor function
u
Tap the top slider segment
T
The display shows .
u
Confirm and save the setting.
T
The automatic extractor function is permanently activated.
Permanently deactivating the automatic extractor
function
u
Tap the bottom slider segment
T
The display shows .
u
Confirm and save the setting.
T
The automatic extractor function is permanently deactivated.
Bekijk gratis de handleiding van Bora Classic 2.0 CKT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bora |
| Model | Classic 2.0 CKT |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 7782 MB |
